Latest Cisco 200-120 Actual Free Exam Questions & Community Discussion, Page 3

Question #31

What is one benefit of PVST+?

A. PVST+ reduces the CPU cycles for all the switches in the network.

B. PVST+ automatically selects the root bridge location, to provide optimized bandwidth usage.

C. PVST+ supports Layer 3 load balancing without loops.

D. PVST+ allows the root switch location to be optimized per VLAN.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #32

Which two commands correctly verify whether port security has been configured on port FastEthernet 0/12 on a switch? (Choose two.)

A. SW1#show port-security interface FastEthernet 0/12

B. SW1#show switchport port-secure interface FastEthernet 0/12

C. SW1#show switchport port-security interface FastEthernet 0/12

D. SW1#show running-config

E. SW1#show port-secure interface FastEthernet 0/12

Discussion 0

Correct Answer: A,D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #33

Scenario:
Refer to the topology. Your company has decided to connect the main office with three other remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the main office and the routers located in the remote branch offices.

An OSPF neighbor adjacency is not formed between R3 in the main office and R4 in the Branch1 office. What is causing the problem?

A. The R3 router ID is configured on R4.

B. There is an OSPF hello and dead interval mismatch.

C. There is a Layer 2 issue; an encapsulation mismatch on serial links.

D. There is an area ID mismatch.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #34

Two routers named Atlanta and Brevard are connected via their serial interfaces as illustrated, but they are unable to communicate. The Atlanta router is known to have the correct configuration.

Given the partial configurations, identify the fault on the Brevard router that is causing the lack of connectivity.

A. incompatible encapsulation

B. insufficient bandwidth

C. incorrect subnet mask

D. link reliability too low

E. incompatible IP address

F. IPCP closed

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #35

The network administrator cannot connect to Switch1 over a Telnet session, although the hosts attached to Switch1 can ping the interface Fa0/0 of the router.

Given the information in the graphic and assuming that the router and Switch2 are configured properly, which of the following commands should be issued on Switch1 to correct this problem?

A. Switch1(config)# interface fa0/1 Switch1(config-if)# ip address 192.168.24.3 255.255.255.0

B. Switch1(config)# interface fa0/1 Switch1(config-if)# duplex full Switch1(config-if)# speed 100

C. Switch1(config)# line con0 Switch1(config-line)# password cisco Switch1(config-line)#login

D. Switch1(config)# ip default-gateway 192.168.24.1

E. Switch1(config)# interface fa0/1 Switch1(config-if)# switchport mode trunk

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #36

Which two statements about late collisions are true? (Choose two.)

A. They may indicate a duplex mismatch.

B. By definition, they occur after the 512th bit of the frame has been transmitted.

C. They indicate received frames that did not pass the FCS match.

D. They are frames that exceed 1518 bytes.

E. They occur when CRC errors and interference occur on the cable.

Discussion 0

Correct Answer: A,B Vote an answer

Question #37

What are the alert messages generated by SNMP agents called?

A. GET

B. TRAP

C. SET

D. INFORM

Discussion 0

Correct Answer: B,D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #38

Refer to the exhibit.

Which address and mask combination represents a summary of the routes learned by EIGRP?

A. 192.168.25.16 255.255.255.240

B. 192.168.25.28 255.255.255.252

C. 192.168.25.0 255.255.255.252

D. 192.168.25.16 255.255.255.252

E. 192.168.25.28 255.255.255.240

F. 192.168.25.0 255.255.255.240

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #39

Which three are the components of SNMP? (Choose three)

A. SNMP Agent

B. SNMP Manager

C. Set

D. SysLog Server

E. MIB

Discussion 0

Correct Answer: A,B,E Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #40

Refer to the exhibit.

The two exhibited devices are the only Cisco devices on the network. The serial network between the two devices has a mask of 255.255.255.252. Given the output that is shown, what three statements are true of these devices? (Choose three.)

A. The Manchester router is a Cisco 2610.

B. The CDP information was received on port Serial0/0 of the Manchester router.

C. The Manchester serial address is 10.1.1.2.

D. The CDP information was sent by port Serial0/0 of the London router.

E. The London router is a Cisco 2610.

F. The Manchester serial address is 10.1.1.1.

Discussion 0

Correct Answer: B,E,F Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #41

Refer to exhibit:

Which two destination addresses will be used by Host A to send data to Host C? (Choose two.)

A. the IP address of Switch 1

B. the MAC address of the router's E0 interface

C. the MAC address of Host C

D. the MAC address of Switch 1

E. the IP address of Host C

F. the IP address of the router's E0 interface

Discussion 0

Correct Answer: B,E Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #42

Refer to the exhibit.

The technician wants to upload a new IOS in the router while keeping the existing IOS. What is the maximum size of an IOS file that could be loaded if the original IOS is also kept in flash?

A. 4 MB

B. 5 MB

C. 7 MB

D. 3 MB

E. 8 MB

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #43

Which port state is introduced by Rapid-PVST?

A. forwarding

B. learning

C. listening

D. discarding

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #44

Which IPv6 address is valid?

A. 2031:0:130F::9C0:876A:130B

B. 2001:0db8:0:130H::87C:140B

C. 2031::130F::9C0:876A:130B

D. 2001:0db8:0000:130F:0000:0000:08GC:140B

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #45

Which of the following are benefits of VLANs? (Choose three.)

A. They increase the size of broadcast domains while decreasing the number of collision domains.

B. They can enhance network security.

C. They increase the size of collision domains.

D. They increase the number of broadcast domains while decreasing the size of the broadcast domains.

E. They simplify switch administration.

F. They allow logical grouping of users by function.

Discussion 0

Correct Answer: B,D,F Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Cisco 200-120 Actual Free Exam Questions & Community Discussion

Download Free Cisco 200-120 Demo