Cisco 300-430 Actual Free Exam Questions & Community Discussion
An engineer must configure Cisco OEAPs for three executives. As soon as the NAT address is configured on the management interface, it is noticed that the WLC is not responding for APs that are trying to associate to the internal IP management address.
Which command should be used to reconcile this?
Which command should be used to reconcile this?
Correct Answer: A
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
A request has come in to use dynamic VLAN assignment on an autonomous AP. After the AP is configured, which RADIUS attribute must an engineer use to pass the VLAN ID to the AP?
Correct Answer: B
Vote an answer
A network administrator for a corporation must create a guest SSID for a captive portal redirect powered by Cisco Catalyst Center (formerly DNA Center). The network includes a Cisco Catalyst
9800-80 WLC, Cisco 9130AXI APs, and Cisco Spaces (formerly Cisco DNA Spaces) using a connector. To support guest client captive portal redirect the administrator must create a security ACL and an intercept ACL. The ACL requirement is:
- ACL WA-v4-int34.235.248.212 must be applied first on traffic coming from the client and keep HTTP(s) traffic toward Cisco DNA Spaces portal IP 34.235.248.212 on the data plane No drop or forward action, just hand the traffic over to the data plane. Then send it to the CPU for redirection except for virtual IP traffic, which is serviced by the web server for all HTTP(s) traffic. Other types of traffic is given to the data plane.
- ACL WA-sec-34.235.248.212 must permit HTTP and HTTPS traffic to the Cisco Spaces portal IP 34.235.248.212 that the administrator configured in the web authentication parameter map.
DNS and DHCP traffic must be allowed, but drop the rest HTTP traffic is intercepted before reaching this ACL and therefore does not need to be covered by this ACL.
Which configuration implements the ACL requirements?
9800-80 WLC, Cisco 9130AXI APs, and Cisco Spaces (formerly Cisco DNA Spaces) using a connector. To support guest client captive portal redirect the administrator must create a security ACL and an intercept ACL. The ACL requirement is:
- ACL WA-v4-int34.235.248.212 must be applied first on traffic coming from the client and keep HTTP(s) traffic toward Cisco DNA Spaces portal IP 34.235.248.212 on the data plane No drop or forward action, just hand the traffic over to the data plane. Then send it to the CPU for redirection except for virtual IP traffic, which is serviced by the web server for all HTTP(s) traffic. Other types of traffic is given to the data plane.
- ACL WA-sec-34.235.248.212 must permit HTTP and HTTPS traffic to the Cisco Spaces portal IP 34.235.248.212 that the administrator configured in the web authentication parameter map.
DNS and DHCP traffic must be allowed, but drop the rest HTTP traffic is intercepted before reaching this ACL and therefore does not need to be covered by this ACL.
Which configuration implements the ACL requirements?
Correct Answer: C
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
Refer to the exhibit. An engineer deployed a Cisco WLC using local EAP. Users who are configured for EAP-PEAP cannot connect to the network. Based on the local EAP debug controller provided, why is the client unable to connect?


Correct Answer: A
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
An engineer must configure rogue AP tracking within Cisco Spaces (formerly Cisco DNA Spaces). The engineer must configure the time after which the RSSI measurement must be considered obsolete and discarded from use in location calculations regardless of the most recent sample. What must be configured to meet the requirement?
Correct Answer: A
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
A wireless network engineer must present a list of all rogue APs with a high severity score to senior management. Which report must be created in Cisco Prime Infrastructure to provide this information?
Correct Answer: C
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied. What actions should be taken to resolve this issue'
Correct Answer: D
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
An engineer is configuring a new wireless network for guest access. The Facebook page of the company must be viewed by the guest users before they get access to the network. A Cisco MSE is used as a wireless component. Which URL must be used in the configuration as the external redirection URL?
Correct Answer: B
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
What is the default NMSP echo interval between Cisco MSE and a Wireless LAN Controller?
Correct Answer: B
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
An engineer must implement a BYOD policy with these requirements:
- Onboarding unknown machines
- Easily scalable
- Low overhead on the wireless network
Which method satisfies these requirements?
- Onboarding unknown machines
- Easily scalable
- Low overhead on the wireless network
Which method satisfies these requirements?
Correct Answer: D
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
Refer to the exhibit. A network administrator must use the webhook feature in Cisco DNA Catalyst Center to receive notifications for multiple events related to the AP - Usage and Client Breakdown report. The external service handling these notifications is located at the callback URL https://example.com/webhook and has the requirements:
- An API key is passed in the X-API-Key header with the value xyz789.
- The payload must be in JSON format, specified in the Content-Type
header.
- The callback URL must include a query parameter event_type to
indicate the type of notification.
- A custom header X-Source with the value CiscoDNAC to identify the
notification source.
Which code snippet must be placed onto the box in the code to complete the Python script that configures the webhook?

- An API key is passed in the X-API-Key header with the value xyz789.
- The payload must be in JSON format, specified in the Content-Type
header.
- The callback URL must include a query parameter event_type to
indicate the type of notification.
- A custom header X-Source with the value CiscoDNAC to identify the
notification source.
Which code snippet must be placed onto the box in the code to complete the Python script that configures the webhook?

Correct Answer: B
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
An engineer has configured Media Stream on the WLC and must guarantee at least 2 Mbps stream per user. Which RRC template should the engineer use?
Correct Answer: D
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
An SSID is set up with central web authentication using Cisco ISE. The new SSID uses guest tunneling from the foreign controller to the anchor controller. Which device must be configured on ISE as the one performing the RADIUS authentication requests for the web authentication method?
Correct Answer: B
Vote an answer
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails. Which configuration change resolves this issue?
Correct Answer: A
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
0
0
0
10
