Cisco 600-210 Actual Free Exam Questions & Community Discussion

Exam Code/Number: 600-210
Exam Name/Title: Implementing Cisco Service Provider Mobility UMTS Networks (SPUMTS)
Certification Provider: Cisco
Corresponding Certification: Cisco Specialist

Exam Questions: 70
Updated On: May 26, 2026

Question #22

Which statement describes HTTP header enrichment and its uses?

A. HTTP header enrichment is the process that allows HTTP headers to be compressed for optimal transfer across the network.

B. HTTP header enrichment allows the operator to define a policy that inserts x-header fields into HTTP POST or GET request packets to provide specific subscriber information such as IMSI or MSISDN to the HTTP server without changing the protocol.

C. HTTP header enrichment allows the operator to define a policy that detects the HTTP packet that requires header enrichment. If a match occurs, the policy drops the packet, modifies the packet inline with quality of service definitions, or creates a log message and forwards the packet unmodified.

D. HTTP header enrichment is the process in which a HTTP packet is analyzed for missing or partial header fields. If missing fields are detected or incomplete, the Cisco ASR 5000 can then take action to insert a new header, repair an existing header, create a log entry, and forward the packet.

Discussion 0

Correct Answer: B Vote an answer

Question #23

Which option describes how IPsec is used for L2TP configuration on GGSN?

A. L2TP encapsulated data is sent over the IPsec tunnel.

B. IPsec encapsulated data is sent between MS and GGSN, and data between LAC (GGSN) and LNS is sent via L2TP tunnel.

C. IPsec encapsulated data is sent over the L2TP tunnel.

D. L2TP references IPsec for forwarding decisions.

Discussion 0

Correct Answer: A Vote an answer

Question #24

Which failure code is sent in the authentication reject message when a UE with USIM fails to receive the AUTN as part of the authentication and ciphering request from the SGSN?

A. MAC failure

B. SYNC failure

C. UMTS authentication unacceptable

D. GSM authentication unacceptable

E. RAND failure

Discussion 0

Correct Answer: D Vote an answer

Question #25

Which two options are functions of the Diameter base protocol? (Choose two.)

A. offline billing

B. transporting CDRs

C. policy control

D. retrieving PDP context information

E. streaming

Discussion 0

Correct Answer: A,C Vote an answer

Question #26

In which two circumstances is Diameter Peer Discovery needed? (Choose two.)

A. The Diameter client must contact a first-hop Diameter agent.

B. The Diameter client is rejected by the peer.

C. The Diameter agent must close the session with a Diameter client.

D. The Diameter agent must search the next agent so that Diameter messages can reach the Diameter server.

E. The Diameter agent must reply to the connect request of a Diameter client.

Discussion 0

Correct Answer: A,D Vote an answer

Question #27

Your company is adding additional subscriber IP network ranges and requires many-to-one NAT to be configured on the Cisco ASR 5000 for the subscriber IP network 10.11.23.0/24. The public IP range is 172.20.21.20 172.20.21.110, and each IP has no more than 100 subscribers.
Which configuration option accomplishes this task?

A. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.110 napt-users-per-ip-address 100

B. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.29 napt-users-per-ip-address 100

C. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 nat-and-pat policy nat_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.29 napt-users-per-ip-address 100

D. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.0.0/16 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.110 napt-users-per-ip-address 1000

Discussion 0

Correct Answer: A Vote an answer

Question #28

In which two ways is GRE used in GGSN? (Choose two.)

A. to transport the enterprise subscriber packets to the corporate gateway

B. to transport the enterprise subscriber packets to the Internet

C. to transport AAA packets between GGSN and the service provider RADIUS server

D. to transport AAA packets between GGSN and the corporate RADIUS server

E. to transport the subscriber traffic between MS and GGSN

Discussion 0

Correct Answer: A,D Vote an answer

Download Free Cisco 600-210 Demo

Simply submit your e-mail address below to get started with our free demo of your Cisco 600-210 exam.