Cisco 642-813日本語 Actual Free Exam Questions & Community Discussion

Here are steps:
hostname SWITCH_B
!
!
vlan 21
name Marketing
vlan 22
name Sales
vlan 23
name Engineering
!
!
interface FastEthernet0/3
switchport trunk allowed vlan 1,21-23
channel-protocol lacp
channel-group 1 mode passive
switchport mode trunk
!
interface FastEthernet0/4
switchport trunk allowed vlan 1,21-23
channel-protocol lacp
channel-group 1 mode passive
switchport mode trunk
!
interface FastEthernet0/9
switchport access vlan 21
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/10
switchport access vlan 21
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/13
switchport access vlan 22
switchport mode access
spanning-tree portfast
!
!
interface FastEthernet0/14
switchport access vlan 22
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/15
switchport access vlan 23
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/16
switchport access vlan 23
switchport mode access
spanning-tree portfast
!
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface Port-channel 1
switchport mode trunk
switchport trunk encapsulation dot1q
spanning-tree allowed vlans 1,21-23
!
interface Vlan1
ip address 192.168.1.11 255.255.255.0
!
end
SWITCH_B(config)#
hostname SWITCH_A
!
panning-tree vlan 11 root primary
spanning-tree vlan 12 root primary
spanning-tree vlan 13 root primary
spanning-tree vlan 21 root primary
spanning-tree vlan 22 root primary
spanning-tree vlan 23 root primary
!
interface FastEthernet0/3
switchport trunk allowed vlan 1,21-23
channel-protocol lacp
channel-group 1 mode active
switchport mode trunk
!
interface FastEthernet0/4
switchport trunk allowed vlan 1,21-23
channel-protocol lacp
channel-group 1 mode active
switchport mode trunk
!
interface FastEthernet0/21
switchport access vlan 21
switchport mode access
!
interface FastEthernet0/22
switchport access vlan 22
switchport mode access
!
interface FastEthernet0/23
switchport access vlan 23
switchport mode access
!
interface GigabitEthernet1/1
!
interface GigabitEthernet1/2
!
interface Port-channel 1
!
interface Vlan1
no ip address
shutdown
!
ip default-gateway 192.168.1.1
!
!
End

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Explanation:
The decrement value on DSW1 should be greater than 11 and less than 19.
The decrement value is currently set to 5 on DSW1 and the priority value is 200. The priority value
for VLAN 102 on DSW2 is 190 so the decrement value on DSW should be greater than 11 in order
for DSW2 to become active.

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).