EMC DES-4121 Actual Free Exam Questions & Community Discussion

A technician replaces a faulty system board on a server in addition to powering on the system, what step must the technician take to install the correct service tag?

A technician receives an email alert that one of the drives on a server has failed Upon replacing the bad drive they receive a second email alert that the same drive has failed.
The technician installs the replacement drive in another server and it works correctly?
What is a valid troubleshooting, step for this issue?

A technician needs to connect a server to a network switch the network switch has only two available network ports so only two network cables can be connected. The user needs as much bandwidth as possible for their workload so the two network cables need to connect to LOM1 and 10M2 The technician wants to satisfy the user requirements yet still be able to access the iDRAC.
What is the best way to configure the iDRAC?

A sever is configured with a RAID 5 Virtual Disk across live hard disks and one spare disk.
If a hard disk failure occurs within me RAID 5 virtual disk. The spare disk needs to be online as quickly as possible II is acceptable for users to expense decreased performance during the rebuild procedure.
How should Wits requirement be met?

A technician is creating a virtual disk in the DRAC (2x 4 TB NL-SAS in RAID 1) lo install Windows 201$ They manually boot to the OS installation media without using (he lifecycle Controller's OS Deployment wizard Only the first 2048 GB on the virtual disk tan be partitioned How should the technician obtain access to the remaining 2 TB (approximately) of storage?

A technician needs to use the iDRAC GUI to toil back a diagnostics firmware revision on a server that was updated four weeks previously. However, the replaced version cannot be found in the Firmware Rollback section on the iDRAC GUI.
What could be the issue?