Extreme Networks EW0-100 Actual Free Exam Questions & Community Discussion
CORRECT TEXT
:The __________ STPD s0 command is used to reset all STP values to default settings for that STPD.
:The __________ STPD s0 command is used to reset all STP values to default settings for that STPD.
Correct Answer:
unconfig
:Exhibit:
You need to setup an 8-port load share group between two switches. Summit #1 will use ports 1-8 and Summit #2 will also use ports 1-8. You will need to connect the ports in the following order: Summit #1, port 1 to Summit #2 port 8, Summit #1, port 2 to Summit #2, port 7, and so forth. Which commands will provide you with the desired result?
You need to setup an 8-port load share group between two switches. Summit #1 will use ports 1-8 and Summit #2 will also use ports 1-8. You will need to connect the ports in the following order: Summit #1, port 1 to Summit #2 port 8, Summit #1, port 2 to Summit #2, port 7, and so forth. Which commands will provide you with the desired result?
Correct Answer: C
Vote an answer
CORRECT TEXT
:When setting up OSPF area 5.5.5.5 as a stub the __________ option is used so that internal routers will not receive Type-3 and Type-4 LSAs in their LSDBs.
:When setting up OSPF area 5.5.5.5 as a stub the __________ option is used so that internal routers will not receive Type-3 and Type-4 LSAs in their LSDBs.
Correct Answer:
nosummary
CORRECT TEXT
:Certain entries are still in the log after you attempted to clear it. You realize this happened because you forgot to use the __________ keyword with the CLEAR LOG command.
:Certain entries are still in the log after you attempted to clear it. You realize this happened because you forgot to use the __________ keyword with the CLEAR LOG command.
Correct Answer:
static
:OSPF area 10.10.10.10 is a stub area that connects to OSPF area 1.1.1.1. OSPF area
1.1.1.1 connects to the backbone area 0.0.0.0. The ABR connecting areas 10.10.10.10 and 1.1.1.1 no longer shows any routes to other areas after being rebooted following an ExtremeWare code upgrade. What is the issue and how should it be resolved?
1.1.1.1 connects to the backbone area 0.0.0.0. The ABR connecting areas 10.10.10.10 and 1.1.1.1 no longer shows any routes to other areas after being rebooted following an ExtremeWare code upgrade. What is the issue and how should it be resolved?
Correct Answer: A,B
Vote an answer
:OSPF LSDB synchronization is maintained through a process called:
Correct Answer: B
Vote an answer
:What is the meaning of the command config iproute add 192.168.0.0/16 193.169.0.1 2?
Correct Answer: A
Vote an answer
:Why would the protocol for VLAN corporate listed as none?
Correct Answer: B
Vote an answer
:When the command disable stpd port 4:1-4:8 is entered what is the result?
Correct Answer: A
Vote an answer
0
0
0
10