Extreme Networks EW0-100 Actual Free Exam Questions & Community Discussion

Exam Code/Number: EW0-100
Exam Name/Title: Extreme Networks Associate (ENA)
Certification Provider: Extreme Networks
Corresponding Certification: Extreme Networks Certifications

Exam Questions: 241
Updated On: Jul 05, 2026

Question #46

:Which of the following can you use to create a router interface?

A. Create a VLAN, assign ports to it, and assign it an IP address and subnet mask.

B. None of these.

C. Create a VLAN and assign ports to it.

D. Create a VLAN and assign it an IP address and subnet mask.

Discussion 0

Correct Answer: A Vote an answer

Question #47

:When enabling load sharing in an Extreme switch, only a single switch must be configured. The switches will auto-negotiate the port sharing settings via the EDP protocol.

A. True

B. False

Discussion 0

Correct Answer: B Vote an answer

Question #48

:Area 0.0.0.0 contains two networks: 10.15.0.0 and 10.20.0.0. Which command should be used in order for only one Summary LSA from area 0.0.0.0 to appear in the LSDB of area 1.1.1.1?

A. config ospf area 0.0.0.0 add range 10.0.0.0/32 add type-3

B. config ospf area 0.0.0.0 add range 10.0.0.0/24 advertise type-3

C. config ospf area 0.0.0.0 add range 10.0.0.0/8 add type-3

D. config ospf area 0.0.0.0 add range 10.0.0.0/16 advertise type-3

Discussion 0

Correct Answer: C Vote an answer

Question #49

CORRECT TEXT
:__________ LSAs are sent out within an autonomous system by an ASBR to advertise external routes. Select the LSA type that is sent out within an autonomous system by an ASBR to advertise external routes.

Discussion 0

Correct Answer:

type 5

Question #50

:If a switch within a spanning tree domain has its spanning tree protocol disabled:

A. None of these

B. The switch will use topology change BPDUs to inform the other switches to alter the existing active topology.

C. BPDUs from adjacent switches running spanning tree will pass through the switch.

D. BPDUs from other switches in the spanning tree domain will be blocked.

Discussion 0

Correct Answer: C Vote an answer

Question #51

:What is the default value for the RIP routetimeout setting?

A. 120 seconds

B. 180 seconds

C. 30 seconds

D. 60 seconds

Discussion 0

Correct Answer: B Vote an answer

Question #52

:Which of the following is a predefined protocol filter?

A. SMTP

B. Appletalk

C. HTTP

D. None of these.

Discussion 0

Correct Answer: B Vote an answer

Question #53

:After adding all VLANs to STPD s0 you are unable to move VLAN corporate to STPD s1. What steps must you take for this to happen?

A. Delete all ports associated with VLAN corporate, add VLAN corporate to STPD s1, reboot the switch, add all necessary ports to VLAN corporate.

B. Disable STP for VLAN corporate, add it to STPD s1, and then enable STP for VLAN corporate.

C. Disable STP for VLAN corporate, add it to STPD s1, reboot, then enable STP for VLAN corporate.

D. Delete all ports associated with VLAN corporate, add VLAN corporate to STPD s1, add all necessary ports to VLAN corporate.

Discussion 0

Correct Answer: D Vote an answer

Question #54

:Which command would you use to configure VLAN CORPORATE (tag 100) with ports 1:1 through 4:8 tagged and ports 5:1 through 8:8 as untagged?

A. config corporate vlan add ports 1:1-4-8 tagged a config corporate vlan add ports 5:1-8:8 untagged

B. config vlan corporate add ports1:1-4:8 tagged a config vlan corporate add ports 5:1-8:8 untagged

C. config corporate vlan ports add 1:1-4:8 tagged a config corporate vlan ports add
5:1:8:8 untagged

D. config vlan corporate ports add 1:1-4:8 tagged a config vlan corporate ports add 5:1-8:8 untagged

Discussion 0

Correct Answer: B Vote an answer

Download Free Extreme Networks EW0-100 Demo

Simply submit your e-mail address below to get started with our free demo of your Extreme Networks EW0-100 exam.