Fortinet FCNSP.v5 Actual Free Exam Questions & Community Discussion
Which of the following methods does the FortiGate unit use to determine the availability of a web cache using Web Cache Communication Protocol (WCCP)?
Correct Answer: C
Vote an answer
Review the IKE debug output for IPsec shown in the Exhibit below.

Which one of the following statements is correct regarding this output?

Which one of the following statements is correct regarding this output?
Correct Answer: C
Vote an answer
FSSO provides a single sign on solution to authenticate users transparently to a FortiGate unit using credentials stored in Windows Active Directory.
Which of the following statements are correct regarding FSSO in a Windows domain environment when NTLM and Polling Mode are not used? (Select all that apply.)
Which of the following statements are correct regarding FSSO in a Windows domain environment when NTLM and Polling Mode are not used? (Select all that apply.)
Correct Answer: C,D
Vote an answer
A network administrator connects his PC to the INTERNAL interface on a FortiGate unit. The administrator attempts to make an HTTPS connection to the FortiGate unit on the VLAN1 interface at the IP address of 10.0.1.1, but gets no connectivity.
The following troubleshooting commands are executed from the DOS prompt on the PC and from
the CLI.
C:\>ping 10.0.1.1
Pinging 10.0.1.1 with 32 bytes of data:
Reply from 10.0.1.1: bytes=32 time=1ms TTL=255
Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
user1 # get system interface
== [ internal ]
namE. internal modE. static ip: 10.0.1.254 255.255.255.128 status: up
netbios-forwarD. disable typE. physical mtu-overridE. disable
== [ vlan1 ]
namE. vlan1 modE. static ip: 10.0.1.1 255.255.255.128 status: up netb
ios-forwarD. disable typE. vlan mtu-overridE. disable
user1 # diagnose debug flow trace start 100
user1 # diagnose debug ena
user1 # diagnose debug flow filter daddr 10.0.1.1 10.0.1.1
id=20085 trace_id=274 msg="vd-root received a packet(proto=6, 10.0.1.130:47927->10.0.1.1:443)
from internal."
id=20085 trace_id=274 msg="allocate a new session-00000b1b"
id=20085 trace_id=274 msg="find SNAT: IP-10.0.1.1, port-43798"
id=20085 trace_id=274 msg="iprope_in_check() check failed, drop"
Based on the output from these commands, which of the following explanations is a possible cause of the problem?
The following troubleshooting commands are executed from the DOS prompt on the PC and from
the CLI.
C:\>ping 10.0.1.1
Pinging 10.0.1.1 with 32 bytes of data:
Reply from 10.0.1.1: bytes=32 time=1ms TTL=255
Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
Reply from 10.0.1.1: bytes=32 time<1ms TTL=255
user1 # get system interface
== [ internal ]
namE. internal modE. static ip: 10.0.1.254 255.255.255.128 status: up
netbios-forwarD. disable typE. physical mtu-overridE. disable
== [ vlan1 ]
namE. vlan1 modE. static ip: 10.0.1.1 255.255.255.128 status: up netb
ios-forwarD. disable typE. vlan mtu-overridE. disable
user1 # diagnose debug flow trace start 100
user1 # diagnose debug ena
user1 # diagnose debug flow filter daddr 10.0.1.1 10.0.1.1
id=20085 trace_id=274 msg="vd-root received a packet(proto=6, 10.0.1.130:47927->10.0.1.1:443)
from internal."
id=20085 trace_id=274 msg="allocate a new session-00000b1b"
id=20085 trace_id=274 msg="find SNAT: IP-10.0.1.1, port-43798"
id=20085 trace_id=274 msg="iprope_in_check() check failed, drop"
Based on the output from these commands, which of the following explanations is a possible cause of the problem?
Correct Answer: D
Vote an answer
Examine the following log message for IPS and identify the valid responses below. (Select all that apply.)
2012-07-01 09:54:28 oid=2 log_id=18433 type=ips subtype=anomaly pri=alert vd=root severity="critical" src="192.168.3.168" dst="192.168.3.170" src_int="port2" serial=0 status="detected" proto=1 service="icmp" count=1 attack_name="icmp_flood" icmp_id="0xa8a4" icmp_type="0x08" icmp_code="0x00" attack_id=16777316 sensor="1" ref="http://www.fortinet.com/ids/VID16777316" msg="anomaly: icmp_flood, 51 > threshold 50"
2012-07-01 09:54:28 oid=2 log_id=18433 type=ips subtype=anomaly pri=alert vd=root severity="critical" src="192.168.3.168" dst="192.168.3.170" src_int="port2" serial=0 status="detected" proto=1 service="icmp" count=1 attack_name="icmp_flood" icmp_id="0xa8a4" icmp_type="0x08" icmp_code="0x00" attack_id=16777316 sensor="1" ref="http://www.fortinet.com/ids/VID16777316" msg="anomaly: icmp_flood, 51 > threshold 50"
Correct Answer: A,B
Vote an answer
Which of the following features could be used by an administrator to block FTP uploads while still allowing FTP downloads?
Correct Answer: D
Vote an answer
A DLP rule with an action of Exempt has been matched against traffic passing through the FortiGate unit. Which of the following statements is correct regarding how this transaction will be handled by the FortiGate unit?
Correct Answer: D
Vote an answer
Shown below is a section of output from the debug command diag ip arp list.
index=2 ifname=port1 172.20.187.150 00:09:0f:69:03:7e state=00000004 use=4589 confirm=4589 update=2422 ref=1
In the output provided, which of the following best describes the IP address 172.20.187.150?
index=2 ifname=port1 172.20.187.150 00:09:0f:69:03:7e state=00000004 use=4589 confirm=4589 update=2422 ref=1
In the output provided, which of the following best describes the IP address 172.20.187.150?
Correct Answer: A
Vote an answer
0
0
0
10
