HP HP0-S35 Actual Free Exam Questions & Community Discussion

Exam Code/Number: HP0-S35
Exam Name/Title: Implementing HP BladeSystem Solutions
Certification Provider: HP
Corresponding Certification: HP ExpertONE Certification

Exam Questions: 207
Updated On: Jul 08, 2026

Question #79

When installing a Modular Cooling System (MCS) G2, which safely considerations must be
implemented? (Select two)

A. Verify the temperature inside the MCS G2 does not exceed 20 degree Celsius (68 Fahrenheit)

B. Plug the power supply cables for the MCS G2 in grounded sockets

C. Attach the MCS G2 rack to the grounding system

D. Verify the maximum water pressure in the MCS G2 does not exceed 0.4 bar (6 PSI)

E. Install the MCS G2 free of the adjacent racks

F. Use aluminum piping for the water supply

Discussion 0

Correct Answer: B,C Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #80

An engineer installs four HP Virtual Connect Flex-10 10 Gb Ethernet modules into a c7000 enclosure. What is required to enable all Ethernet NICs on all servers to have access to any Virtual Connect Ethernet module uplink port?

A. HP Insight Control central management server (CMS)

B. External stacking links between the interconnects

C. Internal stacking link enablement for all modules in the Onboard Administrator interface

D. Virtual Connect Enterprise Manager license

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #81

A customer's environment has Insight Remote Support. You just installed a new Windows server and discovered and configured it within the Insight Remote Support user interface
What is the safest way to validate that events will flow correctly?

A. Pull a drive from the monitored Windows Server

B. Pull a fan from the monitored Windows Server

C. Send a test trap or test indication from the System Management Homepage of the Central Management Server

D. Send a test trap or test indication from System Management Homepage of the monitored Windows Server

Discussion 0

Correct Answer: D Vote an answer

Question #82

At a customer meeting, a concern was raised about IT infrastructure security management. In planning the solution for this concern, which critical area should be addressed?

A. Isolated management LAN access.

B. The use of a common user ID and common IP subnet with the production LAN.

C. A virtual network with VLAN ID 1

D. The use of a common password to access all management components.

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #83

HOTSPOT
Match each Virtual Connect term with its description.

Discussion 0

Correct Answer:

Explanation:

Question #84

How does virtual connect refer to fiber channel technology?

A. FCIP

B. FCOE

C. FC port

Discussion 0

Correct Answer: C Vote an answer

Question #85

A customer has an LTO-4 tape drive connected to an HP DL380 server. The customer wants to integrate a new backup solution into an HP BladeSystem c7000 enclosure and maximize capacity. Which HP product should be recommended?

A. SB1760c

B. x3800sb

C. SB920c

D. SB3000c

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #86

You configured and installed the VCA on a server, but are unable to access VCRM using the administrator login credentials.
What should you do?

A. Change the VCRM trust relationship to Trust

B. Reboot the system

C. Wait ten minutes for it to propagate through the network

D. Log in using a separate network user login and password other than administrator

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #87

In an HP BL460c Gen8 server, which NIC RBSU personality setting allows the Converged Network Adapter to connect to the Fiber Channel storage?

A. FCIP

B. FCoE

C. FC Connect

D. iSCSI

Discussion 0

Correct Answer: B Vote an answer

Question #88

What is the correct UEFI shell command to check the boot profile used for ignite/UX on an HP integrity BL860c i2 blade server?

A. dbprofile

B. lanboot

C. bootprf

D. ugnitecfg

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #89

A customer adds a BL460c G7 Blade to a c-Class enclosure with Virtual Connect (VC) installed, boot the server, and sets PXE on the second NIC in the ROM Base Setup Utility (RBSU). The blade connects, but due to a network issue, does not complete, and the blade is cold booted. Now the blade never connects to the HP Insight Control Deployment Server.
What is needed to enable the blade to always connect to the deployment servers?

A. Set PXE on the first NIC in the server profile

B. Set PXE on the second NIC in the VC profile

C. Enable SmartLink on the VC profile on the second NIC

D. Recreate the VC profile with PXE enabled on the second NIC

Discussion 0

Correct Answer: B Vote an answer

Question #90

While analyzing a customer's business requirements, you learn that they would like to consolidate their interconnect equipment and allocate network bandwidth based on application requirements. Which interconnect technology should you recommend?

A. HP Virtual Connect 6120 Blade

B. HP InfiniBand interconnect

C. HP Virtual Connect Flex-10

D. HP 6120XG Blade Switch

E. HP GBE2c Layer 2/3 Ethernet Blade Switch

Discussion 0

Correct Answer: C Vote an answer

Question #91

What should be used to improve iSCSI performance, Especially for large Block application?

A. A Vlan for every iSCSI path, Separating devices and LUNs

B. Jumbo frames and switches with Large buffers

C. Ethernet switches with minimal Buffers, Store, and forward enabled

D. Ethernet switch with minimal buffers and 1500 MTU

Discussion 0

Correct Answer: B Vote an answer

Download Free HP HP0-S35 Demo

Simply submit your e-mail address below to get started with our free demo of your HP HP0-S35 exam.