HP HP2-T25 Actual Free Exam Questions & Community Discussion

Exam Code/Number: HP2-T25
Exam Name/Title: Servicing HP Rack-Tower Server Solutions
Certification Provider: HP
Corresponding Certification: HP ATP

Exam Questions: 95
Updated On: Jul 08, 2026

Question #11

How can you validate the installed firmware versions on an HP Integrity rx2800 i2 server? (Select two.)

A. Use the fw command on the iLO.

B. Use the sysrev command on the iLO.

C. Check the firmware information in the UEFI main menu.

D. Check the FW Revisions tab in the iLO web GUI.

E. Check the firmware information in the Virtual Front Panel (VFP) on the iLO.

Discussion 0

Correct Answer: B,D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #12

The ILO of an HP Integrity rx2800 i2 server does not respond through LAN or serial connection nut the operating system is up and can be accessed.How can you reset the ILO?

A. Press and hold the power button at the front of the server for four to eight second

B. As there is no ILO reset button reboot the operating system of the server

C. As there is no ILO reset button shut down the operating system of the server and the power cycle it with the power button at the front of the server

D. Press the ILO physical presence pinhole button at the rear of the server for less than four second

Discussion 0

Correct Answer: D Vote an answer

Question #13

What is the default port to use to access the System Management Homepage with Internet Explorer for a ProLiant Server?

A. 2321

B. 2381

C. 2391

D. 2301

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #14

Where can the server PSP be chosen for version comparison and updates?

A. VCEM

B. SMH

C. SIM VCRM

D. VCA

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #15

While installing an R7000 UPS, an engineer is asked to mount a ground bonding wire to the R7000. Referring to the exhibit, what is the intended ground wire connection point?

A. item 11

B. item 7

C. item 12

D. item 9

E. item 10

F. item 16

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #16

An HP ProLiant DL 380 G7 server has a failure indicating that memory slot DIMM 1 has errors.To Troubleshoot the problem,you exchange the memory modules in slot 1 and 2 with each other.LED next to slot 1 is lit.

A. Run the ECC memory test in the diagnostics to correct the errors.

B. Replace the system board and rerun the memory diagnostics

C. Replace both memory modules in slot 1 and 2

D. Replace the memory modules in slot 1 because it is definitely bad

Discussion 0

Correct Answer: D Vote an answer

Question #17

A customer has placed a service call because RAID 6 cannot be configured on a Smart Array P420i controller using 4 disk drives. What is the most likely cause of the problem?

A. The P420i Smart Array Controller does not support RAID 6.

B. The customer needs a minimum of 6 disk drives to support RAID 6.

C. The battery backed cache option is not installed.

D. The P420i is Smart Array Controller is defective.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #18

An HP Integrity rx2800 i2 server failed with a processor power failure.Which action needs to be taken to solve this issue?

A. Replace the processor power pod only

B. Replace the heat sink as it includes the power pod

C. Replace the processor and the heat sink

D. Replace the processor and reuse the old heat sink

Discussion 0

Correct Answer: D Vote an answer

Question #19

Which statements are correct about SIM 7.0 Agentless Management? (Select two.)

A. Agentless Management Service runs on the host to provide software information directly to the iLO Management Engine.

B. HP SIM communicates with the CPU and collects essential data for the OS.

C. HP SIM communicates with the iLO Management Engine to collect hardware data.

D. Agentless Management is provided by the CPU.

Discussion 0

Correct Answer: A,C Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #20

CORRECT TEXT
Match the correct description to each image.

Discussion 0

Correct Answer:

Figure-1 iPDU intelligent extension (http://h30094.www3.hp.com/product.aspx?sku=10369325&pagemode=ca)
Figure-2 Modular PDU (http://www.amatteroffax.com/itempagey_invid_1274833_d_hp-24a-high-voltage-usjp-modular-pdu-eva-only.html)
Figure-3 iPDU core (http://www.govgroup.com/hp-af520a-6-outlet-power-distribution-unit-2264798-prd1.htm)
Figure-4 power distribution rack (http://www8.hp.com/uk/en/products/pdu/product-detail.html?oid=1143435)

Download Free HP HP2-T25 Demo

Simply submit your e-mail address below to get started with our free demo of your HP HP2-T25 exam.