HP HPE7-A01 Actual Free Exam Questions & Community Discussion

You are are doing tests in your lab and with the following equipment specifications:
- AP1 has a radio that generates a 16 dBm signal.
- AP2 has a radio that generates a 13 dBm signal.
- AP1 has an antenna with a gain of 8 dBi.
- AP2 has an antenna with a gain of 12 dBi.
The antenna cable for AP1 has a 4 dB loss. The antenna cable for AP2 has a 3 dB loss.
What would be the calculated Equivalent Isotropic Radiated Power (EIRP) for AP1?

Refer to the image. Your customer is complaining of weak Wi-Fi coverage in their office. They mention that the office on the other side of the hall has much better signal. What is the likely cause of this issue?

How do User Experience Insight (UXI) sensors improve network monitoring?

Your customer currently has two (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution.
What would you explain regarding the AOS-CX VSX switch pair when the Spanning-tree needs to be set up?

With the Aruba CX switch configuration, what is the Active Gateway feature that is used for and is unique to VSX configuration?

Your manufacturing client is having installers deploy seventy headless scanners and fifty IP cameras in their warehouse. These new devices do not support 802.1X authentication.
How can HPE Aruba Networking reduce the IT administration overhead associated with this deployment while maintaining a secure environment using MPSK?

You are configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for your network. Traffic originating from 10.2.250.0/24 should use a new default route to 10.1.1.253. Other non-default routes for this subnet should not be affected by this change.
What are two parts of the solution for these requirements? (Choose two.)

A system engineer needs to preconfigure several CX 6300 switches that will be sent to a remote office. An untrained local field technician will do the rollout of the switches and the mounting of several AP-515s and AP-575s. Cables running to the APs are not labeled.
The VLANs are already preconfigured to VLAN 100 (mgmt.), VLAN 200 (clients), and VLAN 300 (guests).
What is the correct configuration to ensure that APs will work properly?

Which statements are true about VSX LAG? (Choose two.)

Which of the following can cause wired network connectivity issues? (Select two.)

What is a primary benefit of BSS coloring?

Your manufacturing client is deploying two hundred wireless IP cameras and fifty headless scanners in their warehouse. These new devices do not support 802.1X authentication. How can HPE Aruba enhance security for these new IP cameras in this environment?

Drag and Drop Question
Match the solution components of HPE Aruba Networking Central NetConductor (Options may be used more than once or not at all.)

You are helping an onsite network technician bring up an HPE Aruba Networking 9004 gateway with ZTP for a branch office. The technician was told to plug in any port for the ZTP process to start.
Thirty minutes after the gateway was plugged in, new users started to complain they were no longer able to get to the internet. One user who reported the issue stated their IP address is
172.16.0.81. However, the branch office network is supposed to be on 10.231.81.0/24.
What should the technician do to alleviate the issue and get the ZTP process started correctly?

Two AOS-CX switches are configured with VSX at the the Access-Aggregation layer where servers attach to them An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the VSX switches.

What is correct about access from the servers to the Core? (Select two.)