Latest IBM 000-587 Actual Free Exam Questions & Community Discussion, Page 4

Question #22

A highly available IBM FileNet P8 environment has just been installed with horizontally scaled Process Engine (PE) servers using a hardware load balancer. There are currently two PE servers in this farm. There are three Connection Points currently configured, one for PE #1, one for PE #2, and one for the virtual address and port of the farm as defined in the load balancer. Additionally there are load balanced implementations of Workplace XT (WPXT) and Content Engine (CE). Assuming all P8 core components are currently active, and the Connection Point for the PE farm is currently selected in the WPXT Site Preferences, which of the following is the best choice for validating PE functionality in conjunction with the load balancer.

A. The required PE session affinity, defined in the load balancer, prevents in-process transactions from failing over to a secondary PE in farmed environment. If a failure occurs, the transaction is rolled-back and the user must restart that transaction upon failing over to a new PE. To test this functionality, begin some PE related work such as launching a workflow and just before completing a step, shutdown the active PE. When attempting to complete the workflow step, the user will have to relaunch that step to continue.

B. Shutdown PE #2. Logon via WPXT. Open Process Designer. Create a simple two-step workflow definition. Validate the workflow definition. Start PE #2 and shutdown PE #1. Launch the workflow. Close Process Designer. Complete the first step of the workflow. Start PE #1 and shutdown PE #2. Complete the second step of the workflow.

C. Open two browsers. In the first browser logon to WPXT and change the Site Preferences by selecting a Connection Point that is configured for PE #1. In the second browser, logon to WPXT, launch a previously created two-step workflow. Complete the first step of the workflow. In the first browser select a Connection Point that is configured for PE #2. In the second browser, complete the second step of the workflow.

D. View the PE Ping Page of the load balancer (i.e. http://<virtual_name>:<virtual_port>/IOR/ping). Continue to refresh this page in the browser until both PE servers respond. View the PE Ping Page of each PE server directly. Compare the results.

Discussion 0

Correct Answer: B Vote an answer

Question #23

An IBM FileNet P8 Administrator for a company would like to secure files and folders in the Content Engine file storage area. Which user should the Administrator use to logon to the operating system to achieve this task?

A. ce_os_user

B. ce_install_user

C. config_mgr_user

D. ce_appserver_install_user

Discussion 0

Correct Answer: A Vote an answer

Question #24

A customer has deployed IBM FileNet Content Engine on a cluster in the IBM WebSphere Application Server. What are the post deployment steps?

A. Stop and start the application server profile.

B. Stop and start the cluster.

C. Stop and start the cluster, as well as the deployment manager and all of its managed nodes.

D. Stop and start the application server where Content Engine is deployed, including the Deployment Manager and all managed nodes.

Discussion 0

Correct Answer: C Vote an answer

Question #25

An IBM client is planning the implementation of a IBM FileNet P8 Platform and needs to identify the solution components. What are the IBM FileNet P8 V5.1 core components?

A. Image Manager, Process Engine, Application Engine, Workplace XT and Rendition Engine

B. Content Engine, Process Engine, Application Engine, Workplace XT, and Rendition Engine

C. Content Engine, Process Engine, and Application Engine

D. Content Engine, Process Engine, Application Engine, Workplace XT and Enterprise Records

Discussion 0

Correct Answer: B Vote an answer

Question #26

A client is planning the implementation of an IBM FileNet P8 platform and needs to identify and plan for deployment environments. What are the installation types that should be considered while planning for a IBM FileNet P8 deployment?

A. Development, Test, Preproduction, Disaster recovery, and Production.

B. Preproduction, Disaster recovery, and Production.

C. Development, Test, Disaster recovery, and Production.

D. Development and Production.

Discussion 0

Correct Answer: A Vote an answer

Question #27

A customer is planning to install a new, highly available, IBM FileNet P8 environment that spans two data centers that are relatively close together and connected by very high speed, redundant, data connections. The network latency between data centers is less than 1 ms. One of the design goals of this enterprise tier implementation is to have both data centers be as active as possible regarding the processing of P8 data. IBM FileNet Enterprise Manager (FEM) will be configured to treat both data centers as a single site. WebSphere Application Server Network Deployment (WAS-ND) has been chosen to host Content Engine (CE) and Workplace XT (WPXT).
Which of the following choices both meets the criteria of the scenario and follows IBM best practices?

A. Configure two WAS-ND cells, one for each site. In each cell, create one cluster for WPXT and one cluster for CE. Create the CE clusters with identical names. Install the CE software on the WAS Deployment Manager node and deploy the EAR file to each CE cluster. Install WPXT on each cluster member node and deploy one WPXT EAR file to each WPXT cluster. Use hardware load balancers and HTTP proxy servers to spread client traffic across the two WPXT clusters' members. Configure each WPXT cluster to point to a list of all CE cluster members across both data centers.

B. Configure WAS-ND as a single cell spanning both data centers. Create two clusters for WPXT, one for each data center. Create two clusters for CE, one for each data center. Install the CE software on the WAS Deployment Manager node and deploy the EAR file to each CE cluster. Install WPXT on each cluster member node (of each WPXT cluster) and deploy one WPXT EAR file to each WPXT cluster. Use hardware load balancers and HTTP proxy servers to spread client traffic across the two WPXT clusters' members. Configure each WPXT cluster to point to the CE cluster in its respective data center.

C. Configure WAS-ND as a single cell spanning both data centers. Create a cluster for WPXT with member nodes at both data centers. Create a cluster for CE with member nodes at both data centers. Install the CE software on the WAS Deployment Manager node and deploy the EAR file to the CE cluster. Install WPXT on each cluster member node and deploy one WPXT EAR file to the WPXT cluster. Use hardware load balancers and HTTP proxy servers to spread client traffic across the WPXT cluster's members. Configure WPXT to point to the members of the CE cluster.

D. Configure two WAS-ND cells, one for each site. In each cell, create one cluster for WPXT and one cluster for CE. Install the CE software on the WAS Deployment Manager node and deploy the EAR file to each CE cluster. Install WPXT on each cluster member node and deploy one WPXT EAR file to each WPXT cluster. Use hardware load balancers and HTTP proxy servers to spread client traffic across the two WPXT clusters' members. Configure each WPXT cluster to point to the CE cluster in its respective data center.

Discussion 0

Correct Answer: D Vote an answer

Question #28

A customer wants to install IBM Content Search Services (CSS) in servers separate from the IBM FileNet Content Engine (CE) and needs to identify, at a high level, the installation and configuration task sequence. What is the complete sequence of installation and configuration tasks that should be performed for the installation and configuration of CSS?

A. Apply the CSS client files to the CE servers, install CSS on the search server and obtain the CSS authentication token. Use FEM to configure CSS servers on CE in Index, Search, or IndexAndSearch mode. Use FEM to add index areas for IBM CSS and enable text search on the object store.

B. Apply the CSS client files to the CE servers, install CSS on the search server, and obtain the CSS authentication token. Using FEM configure CSS servers on CE in Index, Search, or IndexAndSearch mode. Use FEM to add index areas for CSS. Use Workplace to enable text search on document classes.

C. Install CSS on the search server, obtain the CSS authentication token and using FileNet Enterprise Manager (FEM) configure CSS servers on CE in Index, Search, or IndexAndSearch mode. Use FEM to add index areas for CSS and enable text search on the object store.

D. Apply the CSS client files to the CE servers, install CSS on the search server and obtain the CSS authentication token. Using FEM configure CSS servers on CE in Index, Search, or IndexAndSearch mode. Use FEM to enable text search on the object store.

Discussion 0

Correct Answer: A Vote an answer

IBM 000-587 Actual Free Exam Questions & Community Discussion

Download Free IBM 000-587 Demo