Microsoft 070-582 Actual Free Exam Questions & Community Discussion

Exam Code/Number: 070-582
Exam Name/Title: Windows Embedded Standard 7 for Developers
Certification Provider: Microsoft
Corresponding Certification: MCTS

Exam Questions: 74
Updated On: May 27, 2026

Question #17

You are creating a Windows Embedded Standard 7 image for a target device. You have a 32bit device driver designed for the retail version of Windows XP. The device driver must be used in the image. The driver has been verified to work on Windows 7. You need to ensure that the image will support the Windows XP driver on the device. What should you do?

A. Add a new OEMFoldersPath entry to EmbeddedEdition_x64 and configure its settings to point to the driver.

B. Use the Select Distribution Share option to select an x86 distribution share.

C. Add a new OEMFoldersPath entry to EmbeddedEdition_x86 and configure its settings to point to the driver.

D. Use the Select Distribution Share option to select an x64 distribution share.

Discussion 0

Correct Answer: B Vote an answer

Question #18

You are developing a Windows Embedded Standard 7 portable device for a customer. You have storage data files on a separate partition. You need to protect the storage data files from unauthorized access. What should you do?

A. Use BitLocker.

B. Use File-Based Write Filter (FBWF).

C. Use Enhanced Write Filter (EWF).

D. Use Hibernate Once Resume Many (HORM).

Discussion 0

Correct Answer: A Vote an answer

Question #19

You are creating a Windows Embedded Standard 7 image for a target device. You have a third-party device driver that is critical during system startup. You have an INF file and binary files for the device driver. You need to add the device driver to the image. What should you do in Image Configuration Editor (ICE)?

A. From the distribution share, add the device driver from the Out-of-Box Drivers folder. Configure the settings to install the driver during the WindowsPE pass.

B. Insert a synchronous command during the auditUser pass.

C. Insert a synchronous command during the Specialize pass.

D. Configure the DriverPaths setting to install the device driver during the auditSystem pass.

Discussion 0

Correct Answer: A Vote an answer

Question #20

You have a Windows Embedded Standard 7 image. You need to create recovery media that has WindowsPE on a USB flash drive. What should you do?

A. Format the USB flash drive by using the FORMAT command. Set the Master Boot Record (MBR) to mark the first partition as active. Copy the base WindowsPE image (Winpe.wim) and the etfsboot.com file to a folder. Use the oscdimg.exe tool to create an ISO file that contains the contents of the folder. Copy the ISO file to the USB flash drive.

B. Format the USB flash drive by using the Diskpart tool and assign the drive letter "X:" to it. Copy the base WindowsPE image (Winpe.wim) to the root directory of the USB flash drive.

C. Format the USB flash drive. Use the Bootsect.exe program to create a BOOTMGR boot sector on the drive. Use the Copype.cmd command to copy the required files to the USB flash drive.

D. Generate the required files by using the Copype.cmd command. Use the Diskpart tool to create a bootable partition on the USB flash drive. Copy the files from the \ISO directory created by the Copype.cmd command to the USB flash drive.

Discussion 0

Correct Answer: D Vote an answer

Question #21

You are creating a Windows Embedded Standard 7 image for a target device. You use Image Configuration Editor (ICE) to configure the answer file. You need to ensure that when the device is turned on, user interaction is not required until the desktop appears. Which setting of EmbeddedEdition_x86 should you configure?

A. Distribution Share\Credentials

B. MachinePassword

C. AutoLogon

D. DefaultConsent

Discussion 0

Correct Answer: C Vote an answer

Question #22

You are creating a Windows Embedded Standard 7 image for a target device. The target device is being migrated from retail Windows to Windows Embedded Standard 7. You need to create a file to import the devices hardware information into Image Configuration Editor (ICE). You also need to ensure that the file includes information about all virtual devices used on the platform. What should you do?

A. Start the target device by using WindowsPE and run the lmageX.exe tool.

B. Start the target device by using WindowsPE and run the TAP.exe tool.

C. Start the target device with retail Windows and run the TAP.exe tool.

D. Start the target device with retail Windows and run the lmageX.exe tool.

Discussion 0

Correct Answer: C Vote an answer

Question #23

You are developing a Windows Embedded Standard 7 image. You need to automate the installation of the image. What should you do?

A. Use the lmageX.exe tool to create a Windows Image (WIM) file.

B. Configure a synchronous command during the oobeSystem pass in the answer file.

C. Configure a synchronous command during the WindowsPE pass in the answer file.

D. Use Image Configuration Editor (ICE) to create an unattended answer file.

Discussion 0

Correct Answer: D Vote an answer

Question #24

You have an image for a Windows Embedded Standard 7 device.
The image supports English and Spanish. The image is configured for English. You need to set the Ul language, user, system, and input locale for the image from English to Spanish. What should you do?

A. Run the lmageX.exe tool along with the /export option.

B. Run the Wpeutil tool along with the /SetMuiLanguage option.

C. Run the Sysprep tool along with the /generalize option.

D. Run the DISM tool along with the /Set-Alllntl option.

Discussion 0

Correct Answer: D Vote an answer

Download Free Microsoft 070-582 Demo

Simply submit your e-mail address below to get started with our free demo of your Microsoft 070-582 exam.