Latest Nutanix NCP-MCI-6.5 Actual Free Exam Questions & Community Discussion, Page 2

Question #13

An Administrator has been asked to deploy VMs using a specific image. The image has been configured with settings and applications that will be used by engineering to develop a new product by the company.
The image is not available on the desired cluster, but it is available in other cluster associated with Prism Central.
Why isno't the image available?

A. The cluster has not been added to the correct category

B. The image bandwidth policy has prevented the image upload.

C. The cluster should be removed from all categories.

D. The image placement policy was configured with enforcement.

Discussion 0

Correct Answer: A Vote an answer

Question #14

An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors. What is the effect on live migration?

A. Live migration is prevented until the administrator enables the legacy migration option.

B. Live migration continues to function as expected and VMs can move to any AHV host.

C. Live migration is prevented until the administrator manually changes the newer processor level.

D. Live migration of VMs is prevented between newer and older processors.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #15

CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.
How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

A. On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.

B. On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.

C. On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.

D. On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.

Discussion 0

Correct Answer: B Vote an answer

Question #16

A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.
What is the effect on the replicas of the VMs?

A. No VMs lose data because of RF2

B. No VMs lose data if the node has two or more SSDs

C. Some VMs may reboot and gain access to data

D. Some VM data may be lost

Discussion 0

Correct Answer: D Vote an answer

Question #17

An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

Which metrics should the administrator review in Prism Analysis Graphs?

A. Cluster CPU and Memory Only

B. Cluster IO, CPU, Memory, Network, App Server CPU

C. Cluster IO, CPU, Memory and Database and App Server CPU

D. Cluster IO, Network, Database and App Server CPU

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #18

A user is complaining about slowness of a mission-critical MSSQL Server. The administrator logs into Prism Element to investigate the VM performance and observes what is shown in the diagram.

Which action would best improve VM performance?

A. Disable hyperthreading in the BIOS.

B. Add additional RAM to the host on which the VM is running.

C. Ensure the host's CPUs ere not excessively overcommitted.

D. Add additional RAM to the user VM.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #19

An administrator has created several custom alert policies, which are applied to the same entities. Prism Central displays a message that a similar policy exists.
In what order of precedence are overlapping policies evaluated?

Discussion 0

Correct Answer:

Explanation:
First Preference:
* Policy is applied to a specific entity
2nd Preference:
* Policy is applied to an entity type in a category
3rd Preference:
* Policy is applied to an entity type in a cluster
4th Preference:
* Policy is applied to all entities of an entity type
Comprehensive Detailed Explanation with References:In Nutanix Prism, when multiple alert policies are created and applied to the same entities, the policies are evaluated based on their specificity. The order of precedence from highest to lowest is as follows:
* Policy is applied to a specific entity: Custom alert policies that are applied to specific entities take precedence over those applied to broader categories. This is because the more specific policy is usually created with a particular context or requirement in mind for that entity.
* Policy is applied to an entity type in a category: The next level of precedence is given to policies that are applied to all entities of a certain type within a specific category. Categories allow grouping of entities based on certain criteria, and policies applied here are more specific than to an entire cluster or entity type.
* Policy is applied to an entity type in a cluster: This refers to policies that are applied to all entities of a certain type within a specific cluster. This is more general than the above two but still targets a specific cluster environment.
* Policy is applied to all entities of an entity type: The lowest precedence is given to policies that are broadly applied to all entities of a particular type across the entire Nutanix environment.
This order ensures that the most specifically targeted policies are given priority, which allows for fine-tuned control and customization of alert policies. The details of alert policy precedence are typically covered in the Nutanix Prism Central Guide and the documentation related to Prism Central's alerting and policies.

Question #20

A system administrator needs to add more VMs to their Nutanix cluster.
Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)

A. Perform an inventory with Life Cycle Management

B. Determine utilization with Cluster Runway

C. Enable Deduplication and Ensure Coding

D. Utilize Optimize Resources for VM efficiency

Discussion 0

Correct Answer: B,D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #21

Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?

A. allssh show_uplinks

B. manage_ovs show_uplinks

C. manage ovs show uplinks

D. allssh manage_ovs show_uplinks

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #22

A customer has a 24-node cluster with all containers configured with RF3. Two different nodes have incurred a simultaneous HDD failure.
What is the result?

A. Sixty minutes after the failures a rebuild of the lost data can remaining HDDs begins to restore to three replicas.

B. The cluster runs in a degraded state until the failed drives are replaced and the data has been restored to three replicas.

C. The Nutanix cluster recognizes the failures and immediately begins to rebuild lost data to three replicas.

D. The VMs with data on those drives crash, and an HA event occurs, restarting them on a remaining healthy node.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #23

A Nutanix cluster is equipped with four nodes. Four VMs on this cluster have been configured with a VM-VM anti-affinity policy and are each being hosted by a different node.
What occurs to the cluster and these VMs during an AHV upgrade?

A. One VM out of the four powers down when the node hosting it reboots.

B. The AHV pre-upgrade checks fail until the four VMs are powered off.

C. One node hosts two VMs while the node being upgraded is in maintenance mode.

D. The AHV pre-upgrade checks fail until the administrator disables the anti-affinity policy.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #24

What is he recommended approach for a constrained VM?

A. Increase the VM resources.

B. Delete the VM.

C. Reboot the VM

D. Decrease the VM resources

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Nutanix NCP-MCI-6.5 Actual Free Exam Questions & Community Discussion

Download Free Nutanix NCP-MCI-6.5 Demo