RedHat EX300 Actual Free Exam Questions & Community Discussion
CORRECT TEXT
Arrange a web service address is: http://serverX.example.com, X is the number of your exam machine.
Deploy it in accordance with the following requirements:
Download ftp://instructor.example.com/pub/rhce/server.html
Cannot do any modification to file document server.html
Rename file document server.html as index.html
Copy the file document server.html to DocumentRoo
Arrange a web service address is: http://serverX.example.com, X is the number of your exam machine.
Deploy it in accordance with the following requirements:
Download ftp://instructor.example.com/pub/rhce/server.html
Cannot do any modification to file document server.html
Rename file document server.html as index.html
Copy the file document server.html to DocumentRoo
Correct Answer:
CORRECT TEXT
Create the group named sysusers.
Create the group named sysusers.
Correct Answer:
1. groupaddsysusersgroupadd command is used to create the group and all group information is stored in /etc/group file.
CORRECT TEXT
There were two systems:
system1, main system on which most of the configuration take place
system2, some configuration here
Virtual hosting.
Setup a virtual host with an alternate document root.
Extend your web to include a virtual for the site vhostsX.example.com">http://vhostsX.example.com Set the document root as /usr/local/vhosts Downloadstation.network0.example.com/pub/rhce/vhost/html">http://station.network0.example.co m/pub/rhce/vhost/html Rename it as index.html Place this document root of the virtual host Note: the other websites configures for your server must still accessible. vhosts.networkX.example.com is already provided by the name server on example.com
There were two systems:
system1, main system on which most of the configuration take place
system2, some configuration here
Virtual hosting.
Setup a virtual host with an alternate document root.
Extend your web to include a virtual for the site vhostsX.example.com">http://vhostsX.example.com Set the document root as /usr/local/vhosts Downloadstation.network0.example.com/pub/rhce/vhost/html">http://station.network0.example.co m/pub/rhce/vhost/html Rename it as index.html Place this document root of the virtual host Note: the other websites configures for your server must still accessible. vhosts.networkX.example.com is already provided by the name server on example.com
Correct Answer:
CORRECT TEXT
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size of that Logical Volume is 400MB. Make successfully that the size of Logical Volume 200MB without losing any data. The size of logical volume 200MB to 210MB will be acceptable.
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size of that Logical Volume is 400MB. Make successfully that the size of Logical Volume 200MB without losing any data. The size of logical volume 200MB to 210MB will be acceptable.
Correct Answer:
CORRECT TEXT
RHCE Test Configuration Instructions
Information for the two systems you will use in test is the following:
system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client.
Password for both of the two systems is atenorth
System's IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements:
system1.group3.example.com: 172.24.3.5
system2.group3.example.com: 172.24.3.10
The subnet mask is 255.255.255.0
Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3.
host.group3.example.com provides a centralized authentication service domain GROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account:
Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.
Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.
Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link:
http://server1.group3.example.com/rhel
Part of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.
You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet 172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.
PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don't need them.
Configure iSCSI Clients
Configure the system2 to make it can link to iqn.2014-09.com.example.domain11:system1 provided by the system, meet the following requirements at the same time:
Block device iSCSI contains a 2100MIB partition, and is formatted as ext4.
This partition mount to the /mnt/data and mount automatically during the system start-up.
1. iSCSI device automatically loads during the system start-up.
RHCE Test Configuration Instructions
Information for the two systems you will use in test is the following:
system1.group3.example.com: is one of the main sever. system2.group3.example.com: mainly used as a client.
Password for both of the two systems is atenorth
System's IP is provided by DHCP, you can regard it as normal, or you can reset to Static IP in accordance with the following requirements:
system1.group3.example.com: 172.24.3.5
system2.group3.example.com: 172.24.3.10
The subnet mask is 255.255.255.0
Your system is a member of DNS domain group3.example.com. All systems in DNS domain group3.example.com are all in subnet 172.24.3.0/255.255.255.0, the same all systems in this subnet are also in group3.example.com, unless specialized, all network services required to be configured can be accessed by systems of domain group3.
host.group3.example.com provides a centralized authentication service domain GROUP3.EXAMPLE.COM, both system1 and system2 have already been pre-configured to be the client for this domain, this domain provides the following user account:
Firewall is enabled by default, you can turn it off when deemed appropriate, other settings about firewall may be in separate requirements.
Your system will be restarted before scoring, so please ensure that all modifications and service configurations you made still can be operated after the restart without manual intervention, virtual machine instances of all examinations must be able to enter the correct multi-user level after restart without manual assistance, it will be scored zero if the test using virtual machine system cannot be restarted or be properly restarted.
Corresponding distribution packages for the testing using operating system Red Hat Enterprise Linux version can be found in the following link:
http://server1.group3.example.com/rhel
Part of the requirements include host security, ensure your host security limit does not prevent the request to allow the host and network, although you correctly configured the network service but would have to allow the host or network is blocked, this also does not score.
You will notice that some requirements which clearly do not allow services be accessed by service domain my133t.org, systems of this domain are in subnet 172.25.1.0/252.255.255.0, and systems of these subnets also belong to my 133t.org domain.
PS: Notice that some test questions may depend on other exam questions, for example, you might be asked to perform a series of restrictions on a user, but this user creation may be required in other questions. For convenient identification, each exam question has some radio buttons to help you identify which questions you have already completed or not completed. Certainly, you do not need to care these buttons if you don't need them.
Configure iSCSI Clients
Configure the system2 to make it can link to iqn.2014-09.com.example.domain11:system1 provided by the system, meet the following requirements at the same time:
Block device iSCSI contains a 2100MIB partition, and is formatted as ext4.
This partition mount to the /mnt/data and mount automatically during the system start-up.
1. iSCSI device automatically loads during the system start-up.
Correct Answer:
CORRECT TEXT
There were two systems:
system1, main system on which most of the configuration take place
system2, some configuration here
Configure IPv6 network.
Configure eth0 with a static IPv6 addresses as follows
Configure a Static IPv6 address in serverX as fddb:fe2a:ab1e::c0a8:64/64 Configure a Static IPv6 address in desktopX as fddb:fe2a:ab1e::c0a8:02/64 Both machines are able to communicate within the network fddb:fe2a:able/64 The changes should be permanent even after the reboot On ServerX:
On DesktopX:
There were two systems:
system1, main system on which most of the configuration take place
system2, some configuration here
Configure IPv6 network.
Configure eth0 with a static IPv6 addresses as follows
Configure a Static IPv6 address in serverX as fddb:fe2a:ab1e::c0a8:64/64 Configure a Static IPv6 address in desktopX as fddb:fe2a:ab1e::c0a8:02/64 Both machines are able to communicate within the network fddb:fe2a:able/64 The changes should be permanent even after the reboot On ServerX:
On DesktopX:
Correct Answer:
On ServerX:
On DesktopX:
On DesktopX:
CORRECT TEXT
Configure the web server, which can be accessed by http://station.domain30.example.com.
Configure the web server, which can be accessed by http://station.domain30.example.com.
Correct Answer:
CORRECT TEXT
Download file from http://ip/dir/restircted.html, and the local user harry can access it by
http://station.domain30.example.com/restircted.html, and cannot be accessed by t3gg.com.
Download file from http://ip/dir/restircted.html, and the local user harry can access it by
http://station.domain30.example.com/restircted.html, and cannot be accessed by t3gg.com.
Correct Answer:
0
0
0
10