VMware VCAN610 Actual Free Exam Questions & Community Discussion

Exam Code/Number: VCAN610
Exam Name/Title: VMware Certified Associate - Network Virtualization
Certification Provider: VMware
Corresponding Certification: VMware Certification

Exam Questions: 178
Updated On: May 26, 2026

Question #27

-- Exhibit - -- Exhibit -

This diagram details the network connectivity from an NSX network and the supporting phy sical network. Locations C and D may be required to process packets with QoS tags.
Based on the diagram, which statement details proper processing of packets if they are QoS tagged?

A. Location B should trust the QoS tags of the external header.

B. Locations C and D will trust the QoS tags of the encapsulated frame when passing packets.

C. Location B should trust the QoS tags of the encapsulated frames that are switched.

D. Location A will mark the inner header of the encapsulated frame.

Discussion 0

Correct Answer: A Vote an answer

Question #28

Which feature is not supported by the vSphere 5.5 Distributed Switch?

A. Multiple link aggregation groups

B. Packet captures at the uplink, virtual switch port, or vNIC

C. IGMP snooping at layer 2

D. Differentiated Service Code Point (DSCP) QOS at layer3

Discussion 0

Correct Answer: C Vote an answer

Question #29

What is determined when an NSX Administrator creates a Segment ID Pool?

A. The total number of addresses that can be used to assign VTEP IP addresses to ESXi hosts during host preparation.

B. The total number of Logical Switches that can be deployed in a single Compute Cluster.

C. The range of VLAN segments that can be assigned to Transport Zones.

D. The range of VXLAN Network Identifiers (VNIs) that can be assigned to Logical Switches.

Discussion 0

Correct Answer: D Vote an answer

Question #30

An administrator has deployed NSX within the vSphere environment, but is unable to deploy an NSX Controller. What step must be taken to resolve the issue?

A. On the NSX Manager, select Enable multicast addressing and complete the configuration.

B. Register the third-party security service device or virtual appliance with NSX Manager

C. Deploy a distributed router and enable the High Availability option.

D. Define a data security group for all deployed virtual machine groups.

Discussion 0

Correct Answer: A Vote an answer

Question #31

Using VMware's best practices, choose two statements that define the best solution for scaling layer 2 services for the virtual network. (Choose two.)

A. Employ a layer 2 switched network.

B. Use VXLAN for an overlay network.

C. Employ a layer 3 switched network.

D. Use GRE for an overlay network.

Discussion 0

Correct Answer: B,C Vote an answer

Question #32

Choose the two statements correctly describing the way NSX provides integration with Cloud Management Platforms (CMP). (Choose two.)

A. VMware provides open source API plug-ins for their own CMP products such as vCD and vCA

B. OpenStack provides integration with the Cinder plug-in.

C. VMware provides out of the box integration with their own CMP products such as vCD and vCAC.

D. OpenStack provides integration with the Neutron plug-in.

Discussion 0

Correct Answer: C,D Vote an answer

Question #33

Which statement best describes firewall packet processing in an NSX environment?

A. Packets that require firewall processing are forwarded to a physical firewall appliance.

B. Packets that require firewall processing are redirected to the nearest ESXi host deployed with a virtual machine based firewall.

C. Packets that require firewall processing are processed in-line on the local hypervisor.

D. Packets that require firewall processing are forwarded to the nearest ESXi host with an embedded firewall module.

Discussion 0

Correct Answer: C Vote an answer

Question #34

A Distributed Router and an NSX Edge Gateway are connected to a Logical Switch with a VNI of 7321. Both also have connections to the external network.The Distributed Router serves as the default gateway for the virtual machines in VNI 7321.
A vSphere administrator does not want to advertise the subnet in VNI 7321 to the rest of the network, but still wants to allow virtual machines in the segment to access external resources.
What two steps should the vSphere administrator take to achieve this? (Choose two)

A. Configure a static route to the NSX Edge Gateway in the upstream router.

B. Make the NSX Edge Gateway the default gateway for VNI 7321.

C. Create an inbound Access Control List on the Distributed Router.

D. Configure a SNAT rule for VNI 7321 on the NSX Edge Gateway.

Discussion 0

Correct Answer: B,D Vote an answer

Question #35

Which two characteristics of the underlying physical network does VMware NSX require for robust IP transport? (Choose two.)

A. The physical network should provide scalable network I/O using Equal Cost Multipathing (ECMP).

B. QoS classification and marking is required to provide end-to-end flow control.

C. The physical network should provide scalable network I/O using Layer 2 Multipathing (L2MP) and Multichassis Link Aggregation (MLAG).

D. QoS is not necessary since classification and marking will be done in the overlay.

Discussion 0

Correct Answer: A,B Vote an answer

Question #36

How many DHCP pools can be created on the NSX Edge?

A. 5,000

B. 20,000

C. 10,000

D. 2,000

Discussion 0

Correct Answer: B Vote an answer

Question #37

Which two statements are valid regarding vCloud Networking and Security (vCNS) and NSX? (Choose two.)

A. Both vCNS and NSX support dynamic routing protocols.

B. NSX supports dynamic routing protocols, vCNS does not.

C. Both vCNS and NSX support multiple hypervisor environments.

D. NSX provides support for multiple hypervisor environments, vCNS does not.

Discussion 0

Correct Answer: B,D Vote an answer

Question #38

How are Logical Firewall rules applied to affected virtual machines?

A. They are pushed by the NSX Manager to the ESXi hosts running the source and/or destination virtual machines.

B. They are pushed by the NSX Controllers into all the ESXi hosts in the same Transport Zone.

C. They are pushed by the NSX Controllers to the ESXi hosts running the destination virtual machines.

D. They are pushed by the NSX Manager to all the ESXi hosts in the NSX environment.

Discussion 0

Correct Answer: A Vote an answer

Question #39

Which statement describes proper packet processing of layer 3 traffic in an NSX for vSphere topology?

A. Only packets requiring routing to another VM on a different host are processed by the distributed router. Other packets are processed by the Logical Router Control VM.

B. All packets are processed by the distributed router. No packets are processed by the Logical Router Control VM.

C. All packets requiring routing are processed by performing a lookup in the Logical Router Control VM and then forwarded.

D. Only packets requiring routing to another VM on the same host are processed by the distributed router. Other packets are processed by the Logical Router Control VM.

Discussion 0

Correct Answer: B Vote an answer

Download Free VMware VCAN610 Demo

Simply submit your e-mail address below to get started with our free demo of your VMware VCAN610 exam.