Avaya 3605 Actual Free Exam Questions & Community Discussion

Exam Code/Number: 3605
Exam Name/Title: Avaya Ethernet Routing Switch Implementation and Maintenance Exam
Certification Provider: Avaya
Corresponding Certification: ACIS

Exam Questions: 173
Updated On: Aug 22, 2026

Question #53

A technician has complied me configuration of an Ethernet Routing (ERS) 5520 to and now must transfer a backup copy of configuration file to server. Which command is used to accomplish this task?

A. 5520-24T-PWR# copy config ftp filename ers5520config.cfg

B. 5520.24T-PWR> copy config ftp filename ers5520 config.cfg

C. 5570-74T PWR# copy config tftp filename ers5520COnfig.cfg

D. 5520-24T-PWR# copy config scp filename ersS520conftg.cfg

Discussion 0

Correct Answer: C Vote an answer

Question #54

After issuing a show ist stats (CLI) or show ist stat (ACLI) command, it is
determined that the running type is normal MLT and not inter Switch Trunks?
(Choose two)

A. The IST is not enabled on the both switches.

B. The Peer IP address is not the address of the Peer switch IST VLAN.

C. The peer IP addresses have to be 192.168.1.1/30 and 192.168.1.2/30.

D. The MLT ID does not match on both switches.

Discussion 0

Correct Answer: A,B Vote an answer

Question #55

A technician is adding the Virtual link Aggregation Control Protocol (VLACP)
configuration
to a Converged
Campus
Solution
where
all Ethernet Routing
Switches (ERSs) are directly connected without intermediary WAN transport
devices. What are two recommended configuration tasks?
(Choose two.)

A. For the Inter Switch Trunks (1ST) links, configure the long time-out value.

B. For the SMLT links, configure the long timeout value.

C. Configure
all links to use a global reserved
multicast
MAC address
for VLACP messages.

D. Configure all links to use the same timeout value.

Discussion 0

Correct Answer: A,C Vote an answer

Question #56

A technician is configuring
an InterSwitch
Frank
(IST)
for
Spilt Multi-Link Franking (SMLT). Which statement about how the IST is addressed is true?

A. Configure the IP address of the VLAN that was created for the IST.

B. Configure the IP address of the ports that comprise the IST.

C. No address configurations are required when configuring an IST.

D. Configure the MAC addresses of the switches on each end of the IST.

Discussion 0

Correct Answer: A Vote an answer

Question #57

What is the
underlying
dynamic
link state
routing
protocol
used for
the implementation of the Avaya Enterprise Fabric?

A. IS-IS

B. SPBV

C. OSPF

D. OSPFv3

Discussion 0

Correct Answer: D Vote an answer

Question #58

When configuring link aggregation, a technician created a Distributed Multi-Link Trunk (DMLT) group on the Edge switch to the switch cluster core. What gets distributed?

A. LACP Enable

B. Spanning Tree Enable

C. Discard Looped Frames

D. Access ports

Discussion 0

Correct Answer: D Vote an answer

Question #59

A technician has implemented RSMLT edge design. After recovering from power outage some clients could not communicate. It has been stated that only one of the core RSMLT switches has recovered. What should have been done to prevent the loss of communications?

A. Clear the peer IP and MAC addresses.

B. Turn off the hold down timer.

C. Set the VLAN to copy RSMLT into from a similarity configured VLAN.

D. Increase the hold up timer to 9999.

Discussion 0

Correct Answer: B Vote an answer

Question #60

Virtual forwarding eliminates the need for multiple physical routers. What is the difference in the Virtual Routing forwarding (VRF)-Lite configuration from Ethernet Routing switches (ERS) 8600/8800 to ERSS300?

A. ERS 8300 supports Inter-VRF routing policies

B. On ERS 8600/8800, VRF-Lite virtualizes the control and data plane as well as the routing tables.

C. ERS 8600/8800 supports inter-VRF routing policies.

D. 8300 supports 250 virtual routers; ERS 8600/8800 supports 256.

Discussion 0

Correct Answer: C Vote an answer

Question #61

What is Enterprise Policy Manager (EPM) used for in an Enterprise network?

A. to assign user role attributes on the RADIUS server

B. to distribute control of packet classification for resiliency and efficiency

C. as an alternative to EA servers

D. to manage
traffic
prioritization
and network
access
security for
business applications

Discussion 0

Correct Answer: D Vote an answer

Question #62

The attempt
to manage
an Ethernet Routing
Switch (ERS)
8600 using a VRRP address
was unsuccessful. What is causing this problem?

A. The fie virtual router identifier is 0.

B. The incorrect MAC offset is configured for the VRRP address.

C. A real IP address is required for management access not a VRRP address.

D. The datacenter interface is set as a critical IP interface.

Discussion 0

Correct Answer: C Vote an answer

Question #63

Which
command
mode contains
the
commands
needed to work on software licenses?

A. Software Configuration

B. Global Configuration

C. Privileged Exec

D. User Exec

Discussion 0

Correct Answer: D Vote an answer

Question #64

During a power-on or cold-start sequence, at which stage can he flags to change the operational environment of the switch be set?

A. image search

B. PC system test

C. boot configuration prompt

D. boot monitor prompt

Discussion 0

Correct Answer: D Vote an answer

Question #65

Ethernet Routing Switch (ERS) 5500 portfolio shares a number of common hardware features. Which feature is unique to the ERS 5530 and is not available on the other ERS 5500 switches?

A. Console serial port

B. Network management Ethernet port

C. Universal Serial Bus (USB) port

D. User Interface push button

Discussion 0

Correct Answer: C Vote an answer

Download Free Avaya 3605 Demo

Simply submit your e-mail address below to get started with our free demo of your Avaya 3605 exam.