Aruba ACMP_6.3 Actual Free Exam Questions & Community Discussion

Exam Code/Number: ACMP_6.3
Exam Name/Title: Aruba Certified Mobility Professional 6.3
Certification Provider: Aruba
Corresponding Certification: Aruba Certification

Exam Questions: 165
Updated On: Jul 06, 2026

Question #25

What is the best practice regarding licensing for a backup master to support Master Redundancy in a network without centralized licensing?

A. Supported limits and installed licenses should be the same on primary master and backup Master

B. On the backup only one license of each typeis needed.

C. Licenses are pushed from the primary to the backup Master along with the configuration

D. The Backup Master does not require licenses to support master redundancy

E. Backup master only requires the AP license

Discussion 0

Correct Answer: A Vote an answer

Question #26

ip access-list session anewone user network 10.1.1.0 255.255.255.0 any permit user host 10.1.1.1 any deny
user any any permit
Referring to the above portion of a Mobility Controller configuration file, what can you conclude? (Choose two)

A. This is a session firewall policy.

B. Any traffic going to destination 10.2.2.2 will be denied.

C. This is an extended Access Control List (ACL).

D. Any traffic going to destination 172.16.100.100 will be permitted.

E. Any traffic going to destination 10.1.1.1 will be denied.

Discussion 0

Correct Answer: A,D Vote an answer

Question #27

Which of the following parameters can be specified in a rule for AP classification? (Choose three)

A. Discovering APs

B. Operating mode of an AP

C. SSID of an AP

D. Number of clients connected to an AP.

E. SNR of an AP.

Discussion 0

Correct Answer: A,C,E Vote an answer

Question #28

What does Aruba Layer 3 redundancy require to operate?

A. LMS-IP

B. ARM

C. Backup LMS-IP

D. Backup AP group

E. VRRP

Discussion 0

Correct Answer: C Vote an answer

Question #29

When creating a firewall rule on an Aruba controller, which parameter is optional?

A. Service

B. Action

C. Destination

D. Source

E. Log

Discussion 0

Correct Answer: E Vote an answer

Question #30

When configuring a server group containing 3 servers, a customer chooses 'fail through mode'. What other configuration option has to be enabled on the controller for this to work with 802.1x authentication?

A. Round robin or top down mode

B. MAC authentication

C. EAP Termination

D. Machine authentication

E. Server group fall through mode

Discussion 0

Correct Answer: C Vote an answer

Question #31

IEEE 802.11r provides support for which of the following:

A. radio measurements within a WLAN

B. fast roaming within a BSS

C. radio measurement within an ESS

D. fast roaming within an ESS

E. roaming across controllers

Discussion 0

Correct Answer: D Vote an answer

Question #32

Centralized licensing is not enabled in a network of 1 Master and 2 Local controllers, what should be the license count on all controllers to terminate 8 APs on each Local controller and support Local redundancy?

A. 1 AP license on Master and 16 AP license on both locals

B. 16 AP license on all controllers

C. 8 AP license on Master and 16 AP license on both locals

D. 16 AP licenses on the Locals

E. 8 AP license on all controllers

Discussion 0

Correct Answer: A Vote an answer

Question #33

A client device associates with an SSID provisioned with 802.1X authentication. The client
is set for PEAP authentication. EAP termination (AAA Fastconnect) is disabled on the controller. But the client continuously cycles through the authentication process. Which of the following could cause this? (Choose two)

A. The DHCP server is not enabled.

B. The VLAN is missing for the SSI

C. The controller does not support PEAP in this mode.

D. The client is provisioned with the wrong EAP type.

E. The client has an expired or revoked server certificate.

Discussion 0

Correct Answer: D,E Vote an answer

Question #34

A port on a controller has been configured as untrusted. No wired access AAA profile or Global AAA profile is configured. When a user connects to that port which of the following statements is true?

A. The user will fall into the default wired access AAA profile and will be given the initial role.

B. the user is denied all access automatically because no wired access AAA or Global AAA profile is assigned.

C. When configuring the port as untrusted, an error message of "no wired access AAA profile exists" Therefore this is an invalid configuration.

D. Since there is no wired access AAA profile, only port policies will be applied

E. Since there is no wired access AAA profile or Global AAA profile the user will be given the logon role.

Discussion 0

Correct Answer: E Vote an answer

Question #35

What settings need to be changed on a factory default AP in order for it to use ADP to discover the Aruba Controller?

A. AP group

B. no changes needed

C. DNS of the controller

D. enable multicast

E. Static route

Discussion 0

Correct Answer: B Vote an answer

Question #36

An administrator creates a WLAN with an unmodified default AAA profile. What is the default role the user is placed in?

A. default-ap

B. guest-logon

C. logon

D. AP-Role

E. default-logon

Discussion 0

Correct Answer: C Vote an answer

Download Free Aruba ACMP_6.3 Demo

Simply submit your e-mail address below to get started with our free demo of your Aruba ACMP_6.3 exam.