CWNP CWDP-302 Actual Free Exam Questions & Community Discussion

You are working with APs that support external antennas. One particular cell is experiencing link problems. It appears that several client devices have very low output power settings and a link mismatch is occurring with the AP.
Which one of the following actions would best resolve the problem?

When implementing WLAN security according to common best practices, what feature should be enabled when configuring an EAP type?

You desire to achieve a 450 Mbps MCS. What 802.11n features (from the numbered list below) are required?
1. Frame aggregation
2. Short GI
3. 40 MHz channels
4. 2 spatial streams
5. 3 spatial streams
6. Transmit beamforming (TxBF)

Assume that your network operates in a regulatory domain that allows use of the entire 5 GHz space allowed in the 802.11ac amendment. In your upcoming 802.11ac deployment, you would like to take advantage of the performance improvements that result from channel bonding. However, after extensive testing, you have determined that your mission-critical WLAN should not use channels requiring DFS support.
Given those two criteria (enable channel bonding and disable DFS channels), in the 5 GHz spectrum, how many non-overlapping 40 MHz channels will your system be able to use?

When implementing a WLAN in a hospital environment, which one of the following is a common mistake made by designers?

One channel was added with the ratification of 802.11ac. What channel is this?

What document helps to protect a consultant from legal action when designing a WLAN and performing site surveys?

In a multiple channel architecture (MCA) network supporting 802.1X authentication, what aspect of WLAN design affects client roaming efficiency and effectiveness?

You are configuring an 802.11ac AP using manual channel planning. The design specification calls for the current AP to be placed on channel 56 in 5 GHz and to disable the 2.4 GHz radio. For what could the 2.4 GHz radio be used if not standard AP operations?