Cisco 300-110 Actual Free Exam Questions & Community Discussion

A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco
9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO. Which command must be added to meet the requirements?

An engineer is conducting a Layer 2 site survey. Which type of client must the engineer match to the survey?

A community bank has three campus locations and one HQ with the data center. Each campus has four Cisco Catalyst 9120 APs. Poor WAN uplinks cause impacted connectivity back to HQ, and each campus is planned to have its own EWC controller based on C9120 AP to keep traffic local. Guest WLAN will be routed locally.
Employee WLAN must be authenticated 802.1x PEAP via HQ ISE but can pass traffic locally once authenticated. HQ WLC will be the primary backup WLC for each WLC. Which design approach should the consulting engineer take?

A company has three Cisco WLCs that are joined as a mobility group. Mobility multicast messaging is enabled. All the WLCs in the mobility group communicate via a multicast. Which configuration must be identical between the three WLCs to validate communication?

A customer has two Cisco wireless controllers named WLC-A and WLC-B. Each controller is in a different building on a campus. The WLCs have different Layer 3 interfaces and broadcast the same SSIDs from their respective APs. Users must remain connected to the same VLAN and maintain their IP addresses during roaming from the APs attached to WLC-A and WLC-B. Which action accomplishes the requirement?

An engineer is using Ekahau Site Survey to create a WLAN plan for a warehouse. The plan is to use patch antennas. Which setting is adjusted when simulated APs are placed on the map?

An engineer is designing a wireless solution for a corporate campus which includes two primary buildings:
Research and Operations. The design must ensure seamless mobility for employees moving between buildings, support uninterrupted connectivity for real-time applications, and facilitate efficient Layer 2 and Layer 3 roaming. Each building ' s 9800-80 WLC manages its local APs, and the solution must support 802.11 r/k/v while maintaining an effective mobility control plane. Which design approach leverages Cisco mobility group architecture to meet the requirements?

During a site survey for a new wireless deployment in a multifloor office building, an engineer must identify sources of interference and ensure optimal AP placement for 5 GHz coverage. While walking the site with a spectrum analyzer, the engineer notices periodic spikes in the noise floor on several channels and inconsistent signal strengths reported by the survey tool, despite visually unobstructed paths. Which action must the engineer take next to accurately assess and mitigate the Layer 1 interference?

An engineer must perform a predictive wireless survey to indicate the number of access points required. The engineer has created a new project and imported the floor plan. Which step must be taken next for accurate AP placement?

A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?