Cisco 300-425 Actual Free Exam Questions & Community Discussion

A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP with high gam antennas tor industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several Aps.
Which strategy will reduce the negative impact of the design?

An engineer is upgrading the legacy access points to 802.11ac Wave 2 capable access points.
The existing gigabit uplinked switches provide 802.3at. Which switch limitation is a concern?

APs in a remote office recently have been converted from local mode to FlexConnect to take advantage of the local switching. After the change, remote wireless users report voice quality issues and bad quality on wireless IP phones while roaming. A debug is performed, and it is noticed that the 802.11r Fast Transition is not working as expected, like on local mode AP, though the same WLAN configuration is in place. What is the cause of the issue regarding the FlexConnect APs?

A customer is deploying an 802.11ac network on a floor to support approximately 300 wireless devices. Which setting must be changed on Cisco Prime Infrastructure Planning Tool to predict the number of APs the customer needs to service the new floor?

An IT administrator is trying to establish the criteria for a predictive coverage design. The environment is a mix of 802.11g data and voice. Which minimum coverage with SNR 25 aligns with Cisco best practice?

An engineer must design AP placements for a new branch office that contains two floors. The engineer uses Ekahau to complete the predictive survey. To calculate the signal bleed through between floors, the engineer creates a building, adds the floors, and attenuations areas. After the scale is set, what else must be added on the floors to accurately measure the signal bleed at a specific location?

An engineer designs a new wireless network that uses a Cisco Catalyst 9800 Series wireless controller. The controller must be in a DMZ. The internal network is to be at the main on-premises data center of the customer. In addition, the customer wants to establish an EoIP tunnel to a Cisco 5520 WLC that is in a regional office. How must this requirement be incorporated into the design?

What is the attenuation value of a human body on a wireless signal?

Guest anchoring is configured for a newly created SSID for your company. It has been noticed that the mobility tunnels are not up, and that MPING fails from your foreign WLC to the anchor WLC.
What is the reason that it is failing?

During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a wireless supplicant to the fabric domain?

An engineer is conducting a Layer 2 site survey.
Which type of client must the engineer match to the survey?

An engineer must design a WLAN that can handle voice traffic and location-based services.
Which two design features enable both services to function properly? (Choose two.)

Which strategies must the engineer use for the antenna deployment model in a warehouse?