Cisco 352-011 Actual Free Exam Questions & Community Discussion

.which two options are benefits of using Topology Independent Loop-Free Alternate in WAN design? (Choose two)

Which aspect is a significant disadvantage of containers?

Refer to the exhibit.

This layer 2 network is expected to add 150 VLANS over the next year, In addition to the existing 50 VLANs within the network which STP types will support this design requirement the least amount of CPU resource and achieving load balancing?

Which two components are the responsibility of the customers in a platform as a Service offering? (Choose two)

You are solving a design failure on a massive Hadoop cluster network that has an application with TCP incast behavior (also known as TCP Throughput collapse) affecting its many-to-one communications with packet loss at the last-hop network device. Which metric must be measured to ensure that the network provides the best performance for this application?

After a large EIGRP network had automatic summarization enabled throughout, it started experiencing routing loops. Which action should you take to quickly resolve the routing loops yet to perform summarization?

Which effect of designing a Layer 2 network using the PortFast fast feature with PVST+ is true?

You are redesigning a single-level IS-IS network with 500 routers, which have short-haul and long-haul links Most of the time the routing domain is stable, but periodically interfaces on long-haul links bounce for a short period of time , causing 10 to 20 flaps in a few minutes. The probable cause is local road construction.
Although fast convergence important, the client has concerns about taxing CPU cycles on the older routing platforms. What change should you recommend that both protects the CPU of the older routers during the short periods of excessive flapping, yet does not have an impact on fast convergence for all interface failures?

A network engineer has been tasked to design an IPV6 wireless sensor network using IEEE 802.15 4 to support an for prefect .Which two protocols does the engineer need to utilize for this design? (Choose two)

Refer to the exhibit.
As part of a redesign project, you must predict multicast behavior. What is the resultant multicast traffic receiving on the shared tree( , G), if it is received on the LHR interface indicated?

What is a correct design consideration of IPv6 MLD snooping?

A company requires to connect two data center sites using a hub-and-spoke design. There are 2000 remote sites. It is required to transfer MPLS labeled packets over the public Internet using one router at each remote site. These MPLS labeled packets must be encapsulated inside IP packets. Which solution must be used to simplify this network design?

An operations engineer asks for your help with a new switching deployment. The engineer confirms that STP is enabled on an edge switch, and a particular port is connected to another switch. The switch is not receiving configuration BPDUs, although it appears that everything is functioning correctly in the network. What is the design explanation?

How can EIGRP topologies be designed to converge as fast as possible in the event of a point-to-point link failure?