Latest Cisco 400-151 Actual Free Exam Questions & Community Discussion, Page 2

Question #16

Refer to the exhibit, You have been investigating an issue with your Cisco UCS blade booting from remote Fibre Channel storage. Upon inspection, you see the output in the exhibit, Which two statements are true?

A. FC_ID 0x5e003 in that of the MDS or Cisco nexus 5000 series switch

B. FC_ID 0x5e003c is that of the storage array

C. FC_ID 0x5e01ef is that of the MDS or Cisco nexus 5000 series switch

D. FC_ID 0x5eo1ef is that of the storage array

E. FC_ID 0x5e003c is that of the HBA

Discussion 0

Correct Answer: D,E Vote an answer

Question #17

Which option is a valid overlay interface configuration and configures the OTV edge device as a secondary OTV adjacency server?

A. Interface Overlay 1
Otv join-interface e101/1/48
Otv adjacency-server unicast-only
Oyv use-adjacency server 10.1.1.1 unicast-only
Otv extend-vlan 5-10

B. Interface Overlay 1
Otv join-interface e1/2
Otv use-adjacency-server 10.1.1.1.10.1.1.2
Otv extend-vlan 5-10

C. Interface Overlay 1
Otv join-interface e101/1/48
Otv adjacency-server secondary
Otv use-adjacency-server primary 10.1.1.1
Otv extend-vlan 5-10

D. Interface Overlay 1
Otv join-interface e1/2
Otv adjacency-server unicast-only
Otv use-adjacency-server 10.1.1.1 unicast-only
Otv extend-vlan 5-10

Discussion 0

Correct Answer: D Vote an answer

Question #18

Which sequence of QoS actions is taken on egress traffic on the Cisco nexus 7000 series switch?

A. classification, marking ,policing ,queuing and scheduling ,mutation

B. marking policing mutation classification queuing and scheduling

C. queuing and scheduling ,classification, marking, policing, mutation

D. Classification, marking, policing, mutation, queuing and scheduling

Discussion 0

Correct Answer: D Vote an answer

Question #19

Refer to the exhibit.

The purpose of this Python function definition is create VLAN pools on ACI solution. Which statement is true?

A. This function can be used by other functions to create a new VLAN pool according to parameters given for each attribute.

B. The script has an error, the ''allocMode.'' Attribute should be dynamic

C. The pool VLAN range created by this function can be used by virtual machine management

D. The pool VLAN range value accepted ACI is between 1 and 4096.

E. After the execution of this function, a new VLAN pool called vlan_pool' is created the default parameters.

Discussion 0

Correct Answer: A Vote an answer

Question #20

Refer to the exhibit.

Which two options must be configured on the Layer 3 Gateway switches to isolate the HSRP between the two data centers?

A. Routed access control list on the DCI on the SVIs that blocks the HSRP control traffic

B. Port access control list on the DCI port-channel that block the HSRP control traffic.

C. VLAN access control list that blocks the HSRP control traffic

D. ARP inspection filter that block the HSRP GARPs.

E. Disable HSRP GARP on the SVIs for the VLANs that move across the DCI.

Discussion 0

Correct Answer: B,E Vote an answer

Question #21

Which two characteristics of an loT network are true? (Choose two)

A. IoT networks are 100% reliable

B. IoT networks are bandwidth constrained

C. IoT networks must be designed for low-powered devices

D. IoT networks use IS-IS for routing

E. The transmission rate in an IoT network is consistent.

Discussion 0

Correct Answer: B,C Vote an answer

Question #22

Which three parameters must be identical for two or more bridges in the same MST region? (Choose three)

A. MST revision number

B. MST diameter

C. MST instance priority

D. MST-hello-time

E. MST name

F. VLAN-to-instance mapping

Discussion 0

Correct Answer: A,E,F Vote an answer

Question #23

Refer to the exhibit. Which two options can be determined by the Cisco UCS environment? (Choose two)

A. The Cisco UCS is in FC switch mode

B. Three FCoE attached services on the FI

C. Seven FCoE attache services are on the FI

D. Five FCoE attached servers are on the FI

E. The Cisco UCS is in the end-host mode

Discussion 0

Correct Answer: A,D Vote an answer

Question #24

Refer to the exhibit.

Which purpose of the ip ospf transmit-delay command is true?

A. This variable sends the OSPF database to the neighbor periodically after time specified in the transmit-delay command

B. This variable is used by the OSPF to send hello packets periodically after the time specified transmit command.

C. This variable adds a specified time to the age of an OSPF update. This parameter has more significance on every low-speed links

D. This variable is used to negotiate transmit-delay with the OSPF neighbors.

Discussion 0

Correct Answer: C Vote an answer

Question #25

Which pair of parameters is used by default to identify the lacp system ID?

A. LACP system priority value and the MAC address

B. root bridge priority and MAC address

C. link cost and root bridge priority

D. LACP port-priority value and the MAC address

Discussion 0

Correct Answer: A Vote an answer

Question #26

The OS team has requested that you expand the receive queues of an existing server. Which action accomplishes this change?

A. Configure and apply a custom LAN connectivity policy.

B. Reconfigure the vNIC to the requested queue size.

C. Reconfigure the default vNIC behavior.

D. Configure and apply a custom adapter policy.

Discussion 0

Correct Answer: D Vote an answer

Question #27

Which three perquisites must be created to enable Cisco UCS authentication via LDAP? (Choose three)

A. Authentication domain

B. LDAP group map

C. Remotely authenticated user

D. LDAP provider group

E. LDAP server

F. LDAP provider

Discussion 0

Correct Answer: B,D,F Vote an answer

Question #28

Which characteristic identifies the link aggregation control protocol in an Ethernet Frame ?

A. FCS

B. Slow Protocols EthereType (8809)

C. 802.1p

D. Flag

Discussion 0

Correct Answer: B Vote an answer

Question #29

Which description of how to enable the Flex Flash Controller auto-synu function on the B200M4 blade is true?

A. Configure a storage policy for FX3S

B. Configure a storage connection policy to use auto-sync.

C. Configure a local disk policy for Flex Flash

D. Enable auto-sync in the servers>inventory>storage sub tab.

Discussion 0

Correct Answer: D Vote an answer

Question #30

Which three issues can cause OSPF neighbors to not be able to establish an adjacency? (Choose three)

A. PIM

B. duplicate RIDs

C. Hello value

D. MTU

E. OSPF instance Tag

F. interface cost in not set

G. Feature Multicast not enabled

Discussion 0

Correct Answer: B,C,D Vote an answer

Cisco 400-151 Actual Free Exam Questions & Community Discussion

Download Free Cisco 400-151 Demo