Latest Cisco 400-151 Actual Free Exam Questions & Community Discussion, Page 3

Question #31

Drag and drop the feature on the left to their correct benefit on the right

Discussion 0

Correct Answer:

Explanation
1-3,2--4,3-1,4-2

Question #32

Refer to the exhibit.

which reason that a directly connected host cannot ping the IP address 10.0.1.2 is true?

A. ICMP redirect is configured

B. VLAN 11 has no ports in STP forwarding state

C. MTU is incorrectly configured

D. Autostate is disabled

Discussion 0

Correct Answer: B Vote an answer

Question #33

What best describes the difference between Automation and Orchestration?

A. Automation refers to an automatic process for completing a single task and Orchestration refers to assembling and coordinating a set of tasks and conditions.

B. Automation describes a hand-off configuration process while Orchestration refers to sets of automation takes that require the network administrator to coordinate.

C. Automation refers to an automatic process for completing multiple tasks with conditions and Orchestration refers to executing tasks in parallel.

D. Automation refers to scripting Languages (Python, Ansible, etc) and orchestration refers to commercial products that control configuration deployment.

Discussion 0

Correct Answer: A Vote an answer

Question #34

Refer to the exhibit.

AN administrator creates two service profiles from a template. Given this configuration, which method to the add additional VLANs to each vEth on each service profile is the most efficient?

A. Add the VLAN to the vNIC on the vNIC template.

B. Unbind the service profiles from the template. Add the VLAN directly to the vNIC under Service Profiles

C. Add the VLAN directly to the vNIC under Service Profiles.

D. Unbind the vNIC templates from the service profile template Add the VLAN to the vNIC templates.

E. Disassociated the service profile add the VLAN to the vNIC on the service profile template.

F. Add the VLAN to the vNIC on the service profile template

Discussion 0

Correct Answer: F Vote an answer

Question #35

Refer to the exhibit. Which option describes the main purpose of the XML message?

A. Modify an existing port group profile

B. shut down an existing port group profile

C. Create a new port group profile

D. Delete an existing port group profile

Discussion 0

Correct Answer: C Vote an answer

Question #36

Which three statements are true about redistribution of routes from L3outs in an ACI fabric? (Choose three)

A. Security import subnets control the forwarding of packets into and out of L3Out connections (data plane).

B. ACI fabric runs MP-BGP.

C. Route control subnets control the exchange of routing information (prefixes) into and of the fabric (control plane).

D. Routes learned from L3Outs on border leaf switches are not redistributes into MP-BGP at the ingress leaf.

E. The routes are advertised to all external Layer Outside connections.

F. Route are not redistributed to leaf switches where the same VRF is present.

Discussion 0

Correct Answer: A,B,C Vote an answer

Question #37

Refer to the exhibit. Which two statements about this configuration command sequence with regards to the Cisco Nexus 5500 are true? (Choose two.)

A. It reserves this FCID so only this FCID when communicating with other Fiber Channel entities.

B. It configures this node to use 0EFC2A as the last 3 bytes of the FPMA.

C. It configures this node to use FCID 0EFC2A to forward the FDISC to when an endpoint is connected.

D. It permits this node to form FCoE only with other nodes configured for the same FC-MAP.

E. It configures this node to use 0EFC2A as the first 3 bytes of the FPMA.

Discussion 0

Correct Answer: D,E Vote an answer

Question #38

For which two multicast distribution modes is RP configuration required? (Choose two)

A. SSM

B. BIDIR

C. RPF routes for multicast

D. ASM

E. UDIR

Discussion 0

Correct Answer: B,D Vote an answer

Question #39

Refer to the exhibit. An admin has created a new EPG in an ACI fabric. The admin then specified static path binding as show in exhibit after submitting this policy configuration, the admin noticed that this newly created EPG had the fault shown in the exhibit. Which option is the likely explanation of the fault?

A. The admin incorrectly configured this static path a "trunk" when it should have been configured as an access(untagged)port.

B. There is not enough information to determine the cause of the problem.

C. There is no fault. The fault is currently in the soaking state and the fault will automatically clear and everything will work as expected.

D. The encap VLAN configured is not within the allow range of VLANs as specified by the associated domain.

Discussion 0

Correct Answer: D Vote an answer

Question #40

Drag and drop the spanning tree protocol standards from left onto the correct characteristics on the right?

Discussion 0

Correct Answer:

Question #41

Refer to the exhibit.

A virtual machine in the EPG "clients" is unable to communication via ICMP with a virtual machine in the EPG "server" which option is the most likely cause of this issue?

A. The EPG "server" is providing the relevant contract but the EPG "clients" is not consuming the contract.

B. Not enough details is provided in the output to determine the exact cause.

C. There is no issue because the configuration rules permit ICMP traffic

D. No contract is configured between the two EPGs.

Discussion 0

Correct Answer: D Vote an answer

Question #42

When you add a VMM domain to an EPG in ACI, it seems that the host that is connected to the EPG port group cannot communicate with its default gateway that is configured on the EPG. Which reason for this behavior is true?

A. The VLAN to which EPG belongs is not configured on the uplink from the fabric interconnect to the Cisco UCS.

B. A contract clocks the communication from the host to its gateway.

C. The configuration is not committed.

D. The VLAN is blocked in the fabric interconnect.

Discussion 0

Correct Answer: A Vote an answer

Question #43

Which two data formats correctly describe the purpose of YANG data models in relation to NETCONF and RESTCONF? (Choose two)

A. YANG data models are used to generate CSV data for RESTCONF

B. YANG data models are used to generate JSON data for RESTCONF

C. YANG data models are used to generate YAML data for NETCONF

D. YANG data models are used to generate XML data for NETCONF

E. YANG data models are used to generate HTML data RESTCONF

Discussion 0

Correct Answer: B,D Vote an answer

Question #44

If FCoE capability is disabled between the switch and adapter, which result is true?

A. The switch accepts only untagged frames from the adapter.

B. Ethernet frames sent to the adapter do not include IEEE 802 1Q tags.

C. The switch accepts only tagged frames from the adapter.

D. The VLAN ID field is always set to 0.

Discussion 0

Correct Answer: B Vote an answer

Question #45

In a Cisco UCS B-Series environment, which option must the network adapters support to enable iSCSI boot?

A. UEFI

B. vNIC

C. iBFT

D. CIMC

E. MPIO

Discussion 0

Correct Answer: C Vote an answer

Cisco 400-151 Actual Free Exam Questions & Community Discussion

Download Free Cisco 400-151 Demo