Latest Cisco 400-151 Actual Free Exam Questions & Community Discussion, Page 4

Question #46

Which of the following are two possible upgrade states for a node in ACI? (Choose two)

A. Aborted

B. Upgrading

C. CompleteNOK

D. ComepleteOK

E. Failed

Discussion 0

Correct Answer: C,D Vote an answer

Question #47

You are configuring an ACI Fabric with Layer 3 out connectivity. You want to allow traffic to transverse from one external EPG to another external EPG, or alternatively to another inter EPG. Which option must be configured to permit the packets between these two EPGs, assuming the subnet is already being advertised correctly?

A. Export Route Control

B. Security import Subnet

C. Aggregate Import

D. Import Route Control

E. Aggregate Export

Discussion 0

Correct Answer: B Vote an answer

Question #48

An IoT solution is more likely to generate a lot of analytics and data. Which of the following enables this information to be analyzed and managed through integration with 3rd party devices and applications?

A. ASR

B. Prime infrastructure

C. IP67

D. API

Discussion 0

Correct Answer: D Vote an answer

Question #49

Refer to the exhibit.

Your application has a reduced health score. Upon inspection you find a fault that impacts the health score.
The fault currently is in the soaking lifecycle state. Which two options are possible next steps while in this state? (Choose two)

A. Once the soaking timer expires the fault ceases and no change is expected in seventy level.

B. The soaking timer expires and moves to the Raised severity level.

C. The condition ceases by itself and goes into the soaking-clearing state.

D. The condition ceases by itself and automatically clears the fault.

E. Acknowledge the fault, which immediately clears It from the system.

Discussion 0

Correct Answer: B,C Vote an answer

Question #50

What is the Expedited Forwarding value in DSCP?

A. 0

B. 34

C. 22

D. 46

Discussion 0

Correct Answer: D Vote an answer

Question #51

Refer to the exhibit.

Which two characteristics can you tell about the device connected on e1/1 from the output from the Cisco UCS CLI? (Choose two)

A. The device is a B-series server

B. The device is a C-series server This device supports FCoE

C. The device supports Ethernet only

D. This device supports PoE

Discussion 0

Correct Answer: B,C Vote an answer

Question #52

Which statement about multipod setup is true?

A. Pod TEP subnet pools must be the same size

B. APICs can be configured in any Pod

C. Pod TEP pools must r mi be nonoverlapping.

D. APICs configured in Pod-2 are assigned a TEP address from the Pod-2 TEP pool.

Discussion 0

Correct Answer: D Vote an answer

Question #53

Which three functional roles of the container networking interface in CNCF reference architecture are true?
(Choose three)

A. application deployment

B. provides container create/delete events

C. provides information of network namespace

D. provisioning

E. networking and IPAM

F. orchestration and management

Discussion 0

Correct Answer: B,C,E Vote an answer

Question #54

Refer to the exhibit, Which two statement about spanning tree are true?(Choose two)

A. BPDUs from a VPC are processed on the switch

B. This switch cannot generate BPDUs for a VPC

C. BPDUs are sent to the peer switch for processing

D. BPDUs received on this switch are dropped because Type 2 inconsistency issues

E. This switch generates BPDUs for a VPC

Discussion 0

Correct Answer: B,C Vote an answer

Question #55

Refer to the exhibit, which statement about the displayed ACI Fabric is true?

A. Integrated Layer 4 - Layer 7 services are not in use

B. The capacity information shown is typical of multipod deployments

C. Too many endpoints are connected to nodes 121 and 122

D. This fabric is configured for VMM integration

E. The Number of user-defined tenants is 26

Discussion 0

Correct Answer: D Vote an answer

Question #56

Which three statements are considered best practice when directly connecting converged network adapters to the fabric? (Choose three)

A. If MSTP is enabled, a separate MST instance must be used for FCoE VLANs

B. Cisco UF links must be configured as spanning-tree edge ports

C. separate FCoE VLANs must be used for FCoE in SAN-A and SAN-B

D. Cisco Unified Fabric links must be configured as access ports and FCoE VLAN must not be configured as a native VLAN

E. A blade switch must connect to multiple converged access switches in a topology

F. A shared VLAN can be used to carry traffic for each virtual fabric in the SAN (for example VI AN 1002 for VSAN 1. VSAN 2, and so on)

Discussion 0

Correct Answer: A,B,C Vote an answer

Question #57

Which three statements are considered best practice when configuring an NFS appliance port on cisco UCS?
(Choose three)

A. If storage must be accessed outside of the Cisco UCS domain, then the appliance port VLANs should be allowed on the upstream switch.

B. Use the UCS supports Static and Link Aggregation Control Protocol port channel for appliance port configuration However, no virtual port channel support.

C. If storage is configured in active/passive mode and both fabric interconnects require communication to the same controller, then the appliance port VLANs should be allowed on the upstream switch.

D. Configuration of the VLAN tagging on the storage side and on the Cisco side simultaneously is recommend.

E. Use of the same VLAN for multiple storage traffic is highly recommended to conserve VLAN namespace use.

F. If storage and servers are located in the same subnets, then the appliance port VLANs should be allowed on the upstream switch.

Discussion 0

Correct Answer: A,B,C Vote an answer

Question #58

Which statement about hard pining is true?

A. When the VLAN validation fails, a VLAN mismatch fault with a severity of warning appears

B. If no uplinks Ethernet port channel is configured with all VLAN on the vNic Cisco UCS manager bring the link down

C. when the VLAN validation fails, a VIF down faults is raised

D. If no uplink Ethernet port or port channel is configured with all VLAN on the vNIC Cisco UCS manager bring the link down

Discussion 0

Correct Answer: A Vote an answer

Question #59

Which method is the best way to troubleshoot a specific workflow execution in UCSD?

A. Open the infrastructure log.

B. Check the specific SR log.

C. Generate tech-support and submit it to the TAC workflow analysis tool.

D. Enabled debug log first, then check the infrastructure logs.

Discussion 0

Correct Answer: B Vote an answer

Question #60

Which statement about network ports in a UCS fabric interconnect is true?

A. Network ports do not trunk any VLANs unless they are overridden in VLAN Manager

B. Network ports trunk all VLANs unless they are overridden in VLAN Manager

C. Network ports do not trunk any VLANs unless they are overridden in a pin group

D. Network ports are placed into a port channel automatically

E. Network ports have BPDU Guard enabled

Discussion 0

Correct Answer: B Vote an answer

Cisco 400-151 Actual Free Exam Questions & Community Discussion

Download Free Cisco 400-151 Demo