Cisco 642-618 Actual Free Exam Questions & Community Discussion
In one custom dynamic application, the inside client connects to an outside server using TCP port 4444 and negotiates return client traffic in the port range of 5000 to 5500. The server then starts streaming UDP data to the client on the negotiated port in the specified range. Which Cisco ASA feature or command supports this custom dynamic application?
Correct Answer: A
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
On the Cisco ASA Software Version 8.3 and later, which type of NAT configuration can be used to translate the source and destination IP addresses of the packet?
Correct Answer: C
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
Which two Cisco ASA configuration tasks are necessary to allow authenticated BGP sessions to pass through the Cisco ASA appliance? (Choose two.)
Correct Answer: A,D
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
Refer to the exhibit.
Which command enables the stateful failover option?
Which command enables the stateful failover option?
Correct Answer: B
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
CORRECT TEXT Instructions
This item contains a simulation task. Refer to the scenario and topology before you start. When you are ready, open the Topology window and click the required device to open the GUI window on a virtual terminal. Scroll to view all parts of the Cisco ASDM screens.
Scenario
Click the PC icon to launch Cisco ASDM. You have access to a Cisco ASA 5505 via Cisco ASDM. Use Cisco ASDM to edit the Cisco ASA 5505 configurations to enable Advanced HTTP Application inspection by completing the following tasks:
1.Enable HTTP inspection globally on the Cisco ASA
2.Create a new HTTP inspect Map named: http-inspect-map to:
a.Enable the dropping of any HTTP connections that encounter HTTP protocol violations
b.Enable the dropping and logging of any HTTP connections when the content type in the HTTP response does not match one of the MIME types in the accept filed of the HTTP request
Note: In the simulation, you will not be able to test the HTTP inspection policy after you complete your configuration. Not all Cisco ASDM screens are fully functional.
After you complete the configuration, you do not need to save the running configuration to the start-up config, you will not be able to test the HTTP inspection policy that is created after you complete your configuration. Also not all the ASDM screens are filly functional.
This item contains a simulation task. Refer to the scenario and topology before you start. When you are ready, open the Topology window and click the required device to open the GUI window on a virtual terminal. Scroll to view all parts of the Cisco ASDM screens.
Scenario
Click the PC icon to launch Cisco ASDM. You have access to a Cisco ASA 5505 via Cisco ASDM. Use Cisco ASDM to edit the Cisco ASA 5505 configurations to enable Advanced HTTP Application inspection by completing the following tasks:
1.Enable HTTP inspection globally on the Cisco ASA
2.Create a new HTTP inspect Map named: http-inspect-map to:
a.Enable the dropping of any HTTP connections that encounter HTTP protocol violations
b.Enable the dropping and logging of any HTTP connections when the content type in the HTTP response does not match one of the MIME types in the accept filed of the HTTP request
Note: In the simulation, you will not be able to test the HTTP inspection policy after you complete your configuration. Not all Cisco ASDM screens are fully functional.
After you complete the configuration, you do not need to save the running configuration to the start-up config, you will not be able to test the HTTP inspection policy that is created after you complete your configuration. Also not all the ASDM screens are filly functional.
Correct Answer:
Here are the step by step Solution for this:
Explanation:
1.>Go to Configuration>>Firewall>>Objects>>Inspect Maps>>HTTP>>Add>>Add name "httpinspect-map">>click on detail>>
a.select "check for protocol violations"
b.Action: Drop connection
c.Log: Enable
d.Click on Inspection: Click Add
e.Select Single Match>>Match type: No Match
f.Criterion: response header field
g.Field: Predefined: Content type
h.value: Content type
i.Action: Drop connection
j.Log: Enable
h.ok>>>ok>>>Apply
HTTP inspection is disabled in global policy by default - we need to enable and use this Inspect Map Achieve this through command line: policy-map type inspect http http-inspect-map parameters protocol-violation action drop-connection match req-resp content-type mismatch drop-connection log policy-map global_policy class inspaection_default inspect http http-inspect-map also you have to edit the global policy to apply this inspection into it. Add/Edit HTTP Map The Add/Edit HTTP Map dialog box is accessible as follows: Configuration > Global Objects > Inspect Maps > HTTP > HTTP Inspect Map > Advanced View > Add/Edit HTTP Inspect The Add/Edit HTTP Inspect dialog box lets you define the match criterion and value for the HTTP inspect map.
Fields
Single Match-Specifies that the HTTP inspect has only one match statement.
Match Type-Specifies whether traffic should match or not match the values.
For example, if No Match is selected on the string "example.com," then any traffic that contains
"example.com"is excluded from the class map.
Criterion-Specifies which criterion of HTTP traffic to match.
-Request/Response Content Type Mismatch-Specifies that the content type in the response
must match oneof the MIME types in the accept field of the request.
-Request Arguments-Applies the regular expression match to the arguments of the request.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Request Body Length-Applies the regular expression match to the body of the request with field
lengthgreater than the bytes specified.
Greater Than Length-Enter a field length value in bytes that request field lengths will be matched
against.
-Request Body-Applies the regular expression match to the body of the request.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Request Header Field Count-Applies the regular expression match to the header of the request
with amaximum number of header fields.
Predefined-Specifies the request header fields: accept, accept-charset, accept-encoding, accept-
language,allow, authorization, cache-control, connection, content-encoding, content-language,
content-length, contentlocation,content-md5, content-range, content-type, cookie, date, expect,
expires, from, host, if-match, ifmodified-since, if-none-match, if-range, if-unmodified-since, last-
modified, max-forwards, pragma, proxyauthorization,range, referer, te, trailer, transfer-encoding,
upgrade, user-agent, via, warning.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Greater Than Count-Enter the maximum number of header fields.
-Request Header Field Length-Applies the regular expression match to the header of the
request with fieldlength greater than the bytes specified.
Predefined-Specifies the request header fields: accept, accept-charset, accept-encoding, accept-
language,allow, authorization, cache-control, connection, content-encoding, content-language,
content-length, contentlocation,
content-md5, content-range, content-type, cookie, date, expect, expires, from, host, if-match,
ifmodified-since, if-none-match, if-range, if-unmodified-since, last-modified, max-forwards, pragma,
proxyauthorization,
range, referer, te, trailer, transfer-encoding, upgrade, user-agent, via, warning.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Greater Than Length-Enter a field length value in bytes that request field lengths will be matched
against.
-Request Header Field-Applies the regular expression match to the header of the request.
Predefined-Specifies the request header fields: accept, accept-charset, accept-encoding, accept-
language,allow, authorization, cache-control, connection, content-encoding, content-language,
content-length, contentlocation,content-md5, content-range, content-type, cookie, date, expect,
expires, from, host, if-match, ifmodified-since, if-none-match, if-range, if-unmodified-since, last-
modified, max-forwards, pragma, proxyauthorization,range, referer, te, trailer, transfer-encoding,
upgrade, user-agent, via, warning.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Request Header Count-Applies the regular expression match to the header of the request with
a maximumnumber of headers.
Greater Than Count-Enter the maximum number of headers.
-Request Header Length-Applies the regular expression match to the header of the request with
lengthgreater than the bytes specified.
Greater Than Length-Enter a header length value in bytes.
-Request Header non-ASCII-Matches non-ASCII characters in the header of the request.
-Request Method-Applies the regular expression match to the method of the request.
Method-Specifies to match on a request method: bcopy, bdelete, bmove, bpropfind, bproppatch,
connect,copy, delete, edit, get, getattribute, getattributenames, getproperties, head, index, lock,
mkcol, mkdir, move,notify, options, poll, post, propfind, proppatch, put, revadd, revlabel, revlog,
revnum, save, search, setattribute,startrev, stoprev, subscribe, trace, unedit, unlock, unsubscribe.
Regular Expression-Specifies to match on a regular expression.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Request URI Length-Applies the regular expression match to the URI of the request with length
greater thanthe bytes specified.
Greater Than Length-Enter a URI length value in bytes.
-Request URI-Applies the regular expression match to the URI of the request.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Response Body-Applies the regex match to the body of the response.
ActiveX-Specifies to match on ActiveX.
Java Applet-Specifies to match on a Java Applet.
Regular Expression-Specifies to match on a regular expression.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Response Body Length-Applies the regular expression match to the body of the response with
field lengthgreater than the bytes specified.
Greater Than Length-Enter a field length value in bytes that response field lengths will be
matched against.
-Response Header Field Count-Applies the regular expression match to the header of the
response with amaximum number of header fields.
Predefined-Specifies the response header fields: accept-ranges, age, allow, cache-control,
connection,content-encoding, content-language, content-length, content-location, content-md5,
content-range, contenttype,date, etag, expires, last-modified, location, pragma, proxy-
authenticate, retry-after, server, set-cookie,trailer, transfer-encoding, upgrade, vary, via, warning,
www-authenticate.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Greater Than Count-Enter the maximum number of header fields.
-Response Header Field Length-Applies the regular expression match to the header of the
response withfield length greater than the bytes specified.
Predefined-Specifies the response header fields: accept-ranges, age, allow, cache-control,
connection,content-encoding, content-language, content-length, content-location, content-md5,
content-range, contenttype,date, etag, expires, last-modified, location, pragma, proxy-
authenticate, retry-after, server, set-cookie,trailer, transfer-encoding, upgrade, vary, via, warning,
www-authenticate.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Greater Than Length-Enter a field length value in bytes that response field lengths will be
matched against.
-Response Header Field-Applies the regular expression match to the header of the response.
Predefined-Specifies the response header fields: accept-ranges, age, allow, cache-control,
connection,content-encoding, content-language, content-length, content-location, content-md5,
content-range, contenttype,date, etag, expires, last-modified, location, pragma, proxy-
authenticate, retry-after, server, set-cookie,trailer, transfer-encoding, upgrade, vary, via, warning,
www-authenticate.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Response Header Count-Applies the regular expression match to the header of the response
with amaximum number of headers.
Greater Than Count-Enter the maximum number of headers.
-Response Header Length-Applies the regular expression match to the header of the response
with lengthgreater than the bytes specified.
Greater Than Length-Enter a header length value in bytes.
-Response Header non-ASCII-Matches non-ASCII characters in the header of the response.
-Response Status Line-Applies the regular expression match to the status line.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regular
expression class maps.
Multiple Matches-Specifies multiple matches for the HTTP inspection.
-H323 Traffic Class-Specifies the HTTP traffic class match.
-Manage-Opens the Manage HTTP Class Maps dialog box to add, edit, or delete HTTP Class
Maps.
Action-Drop connection, reset, or log.
Log-Enable or disable.
NOTE:
http://www.cisco.com/en/US/docs/security/asa/asa83/asdm63/configuration_guide/inspect_basic.h
tml#wp1144259
and/or
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080b84568.shtml
Through achieve this command line: policy-map type inspect http http-inspect-map parameters protocol-violation action drop-connection log
policy-map type inspect http http-inspect-map match not response header content-type application/msword drop-connection log
Explanation:
1.>Go to Configuration>>Firewall>>Objects>>Inspect Maps>>HTTP>>Add>>Add name "httpinspect-map">>click on detail>>
a.select "check for protocol violations"
b.Action: Drop connection
c.Log: Enable
d.Click on Inspection: Click Add
e.Select Single Match>>Match type: No Match
f.Criterion: response header field
g.Field: Predefined: Content type
h.value: Content type
i.Action: Drop connection
j.Log: Enable
h.ok>>>ok>>>Apply
HTTP inspection is disabled in global policy by default - we need to enable and use this Inspect Map Achieve this through command line: policy-map type inspect http http-inspect-map parameters protocol-violation action drop-connection match req-resp content-type mismatch drop-connection log policy-map global_policy class inspaection_default inspect http http-inspect-map also you have to edit the global policy to apply this inspection into it. Add/Edit HTTP Map The Add/Edit HTTP Map dialog box is accessible as follows: Configuration > Global Objects > Inspect Maps > HTTP > HTTP Inspect Map > Advanced View > Add/Edit HTTP Inspect The Add/Edit HTTP Inspect dialog box lets you define the match criterion and value for the HTTP inspect map.
Fields
Single Match-Specifies that the HTTP inspect has only one match statement.
Match Type-Specifies whether traffic should match or not match the values.
For example, if No Match is selected on the string "example.com," then any traffic that contains
"example.com"is excluded from the class map.
Criterion-Specifies which criterion of HTTP traffic to match.
-Request/Response Content Type Mismatch-Specifies that the content type in the response
must match oneof the MIME types in the accept field of the request.
-Request Arguments-Applies the regular expression match to the arguments of the request.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Request Body Length-Applies the regular expression match to the body of the request with field
lengthgreater than the bytes specified.
Greater Than Length-Enter a field length value in bytes that request field lengths will be matched
against.
-Request Body-Applies the regular expression match to the body of the request.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Request Header Field Count-Applies the regular expression match to the header of the request
with amaximum number of header fields.
Predefined-Specifies the request header fields: accept, accept-charset, accept-encoding, accept-
language,allow, authorization, cache-control, connection, content-encoding, content-language,
content-length, contentlocation,content-md5, content-range, content-type, cookie, date, expect,
expires, from, host, if-match, ifmodified-since, if-none-match, if-range, if-unmodified-since, last-
modified, max-forwards, pragma, proxyauthorization,range, referer, te, trailer, transfer-encoding,
upgrade, user-agent, via, warning.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Greater Than Count-Enter the maximum number of header fields.
-Request Header Field Length-Applies the regular expression match to the header of the
request with fieldlength greater than the bytes specified.
Predefined-Specifies the request header fields: accept, accept-charset, accept-encoding, accept-
language,allow, authorization, cache-control, connection, content-encoding, content-language,
content-length, contentlocation,
content-md5, content-range, content-type, cookie, date, expect, expires, from, host, if-match,
ifmodified-since, if-none-match, if-range, if-unmodified-since, last-modified, max-forwards, pragma,
proxyauthorization,
range, referer, te, trailer, transfer-encoding, upgrade, user-agent, via, warning.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Greater Than Length-Enter a field length value in bytes that request field lengths will be matched
against.
-Request Header Field-Applies the regular expression match to the header of the request.
Predefined-Specifies the request header fields: accept, accept-charset, accept-encoding, accept-
language,allow, authorization, cache-control, connection, content-encoding, content-language,
content-length, contentlocation,content-md5, content-range, content-type, cookie, date, expect,
expires, from, host, if-match, ifmodified-since, if-none-match, if-range, if-unmodified-since, last-
modified, max-forwards, pragma, proxyauthorization,range, referer, te, trailer, transfer-encoding,
upgrade, user-agent, via, warning.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Request Header Count-Applies the regular expression match to the header of the request with
a maximumnumber of headers.
Greater Than Count-Enter the maximum number of headers.
-Request Header Length-Applies the regular expression match to the header of the request with
lengthgreater than the bytes specified.
Greater Than Length-Enter a header length value in bytes.
-Request Header non-ASCII-Matches non-ASCII characters in the header of the request.
-Request Method-Applies the regular expression match to the method of the request.
Method-Specifies to match on a request method: bcopy, bdelete, bmove, bpropfind, bproppatch,
connect,copy, delete, edit, get, getattribute, getattributenames, getproperties, head, index, lock,
mkcol, mkdir, move,notify, options, poll, post, propfind, proppatch, put, revadd, revlabel, revlog,
revnum, save, search, setattribute,startrev, stoprev, subscribe, trace, unedit, unlock, unsubscribe.
Regular Expression-Specifies to match on a regular expression.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Request URI Length-Applies the regular expression match to the URI of the request with length
greater thanthe bytes specified.
Greater Than Length-Enter a URI length value in bytes.
-Request URI-Applies the regular expression match to the URI of the request.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Response Body-Applies the regex match to the body of the response.
ActiveX-Specifies to match on ActiveX.
Java Applet-Specifies to match on a Java Applet.
Regular Expression-Specifies to match on a regular expression.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Response Body Length-Applies the regular expression match to the body of the response with
field lengthgreater than the bytes specified.
Greater Than Length-Enter a field length value in bytes that response field lengths will be
matched against.
-Response Header Field Count-Applies the regular expression match to the header of the
response with amaximum number of header fields.
Predefined-Specifies the response header fields: accept-ranges, age, allow, cache-control,
connection,content-encoding, content-language, content-length, content-location, content-md5,
content-range, contenttype,date, etag, expires, last-modified, location, pragma, proxy-
authenticate, retry-after, server, set-cookie,trailer, transfer-encoding, upgrade, vary, via, warning,
www-authenticate.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Greater Than Count-Enter the maximum number of header fields.
-Response Header Field Length-Applies the regular expression match to the header of the
response withfield length greater than the bytes specified.
Predefined-Specifies the response header fields: accept-ranges, age, allow, cache-control,
connection,content-encoding, content-language, content-length, content-location, content-md5,
content-range, contenttype,date, etag, expires, last-modified, location, pragma, proxy-
authenticate, retry-after, server, set-cookie,trailer, transfer-encoding, upgrade, vary, via, warning,
www-authenticate.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Greater Than Length-Enter a field length value in bytes that response field lengths will be
matched against.
-Response Header Field-Applies the regular expression match to the header of the response.
Predefined-Specifies the response header fields: accept-ranges, age, allow, cache-control,
connection,content-encoding, content-language, content-length, content-location, content-md5,
content-range, contenttype,date, etag, expires, last-modified, location, pragma, proxy-
authenticate, retry-after, server, set-cookie,trailer, transfer-encoding, upgrade, vary, via, warning,
www-authenticate.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regularexpression class maps.
-Response Header Count-Applies the regular expression match to the header of the response
with amaximum number of headers.
Greater Than Count-Enter the maximum number of headers.
-Response Header Length-Applies the regular expression match to the header of the response
with lengthgreater than the bytes specified.
Greater Than Length-Enter a header length value in bytes.
-Response Header non-ASCII-Matches non-ASCII characters in the header of the response.
-Response Status Line-Applies the regular expression match to the status line.
Regular Expression-Lists the defined regular expressions to match.
Manage-Opens the Manage Regular Expressions dialog box, which lets you configure regular
expressions.
Regular Expression Class-Lists the defined regular expression classes to match.
Manage-Opens the Manage Regular Expression Class dialog box, which lets you configure
regular
expression class maps.
Multiple Matches-Specifies multiple matches for the HTTP inspection.
-H323 Traffic Class-Specifies the HTTP traffic class match.
-Manage-Opens the Manage HTTP Class Maps dialog box to add, edit, or delete HTTP Class
Maps.
Action-Drop connection, reset, or log.
Log-Enable or disable.
NOTE:
http://www.cisco.com/en/US/docs/security/asa/asa83/asdm63/configuration_guide/inspect_basic.h
tml#wp1144259
and/or
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a0080b84568.shtml
Through achieve this command line: policy-map type inspect http http-inspect-map parameters protocol-violation action drop-connection log
policy-map type inspect http http-inspect-map match not response header content-type application/msword drop-connection log
How many interfaces can a Cisco ASA bridge group support and how many bridge groups can a Cisco ASA appliance support?
Correct Answer: A
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
Which Cisco ASA CLI command is used to enable HTTPS (Cisco ASDM) access from any inside host on the 10.1.16.0/20 subnet?
Correct Answer: A
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
Refer to the exhibit.
Which Cisco ASA configuration has the minimum number of the required configuration commands to enable the Cisco ASA appliance to establish EIGRP neighborship with its two neighboring routers?
Which Cisco ASA configuration has the minimum number of the required configuration commands to enable the Cisco ASA appliance to establish EIGRP neighborship with its two neighboring routers?
Correct Answer: C
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
Refer to the exhibit.
What is a reasonable conclusion?
What is a reasonable conclusion?
Correct Answer: C
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
0
0
0
10