Microsoft AZ-801 Actual Free Exam Questions & Community Discussion
Drag and Drop Question
You have two on-premises servers named Server1 and Server2 that run Windows Server.
Server1 hosts a virtual machine named VM1.
You have an Azure subscription.
You plan to back up VM1 by using Microsoft Azure Backup Server (MABS).
You need to deploy an on-premises MABS server. The solution must ensure that you can restore VM1, including its configuration data.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
You have two on-premises servers named Server1 and Server2 that run Windows Server.
Server1 hosts a virtual machine named VM1.
You have an Azure subscription.
You plan to back up VM1 by using Microsoft Azure Backup Server (MABS).
You need to deploy an on-premises MABS server. The solution must ensure that you can restore VM1, including its configuration data.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Correct Answer:
Explanation:
Reference:
https://learn.microsoft.com/en-us/azure/backup/backup-azure-microsoft-azure-backup
Drag and Drop Question
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The functional level of the forest and the domain is Windows Server 2012 R2. The domain contains the domain controllers shown in the following table.
You need to raise the forest functional level to Windows Server 2016. The solution must meet the following requirements:
- Ensure that there are three domain controllers after you raises the
level.
- Minimize how long the FSMO roles are unavailable.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com. The functional level of the forest and the domain is Windows Server 2012 R2. The domain contains the domain controllers shown in the following table.
You need to raise the forest functional level to Windows Server 2016. The solution must meet the following requirements:
- Ensure that there are three domain controllers after you raises the
level.
- Minimize how long the FSMO roles are unavailable.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Correct Answer:
Explanation:
https://docs.microsoft.com/en-us/windows-server/identity/ad-ds/deploy/upgrade-domain-controllers
Drag and Drop Question
You have three servers named Server1, Server2, Server3 that run Windows Server and have the Hyper-V server role installed.
You plan to create a hyper-converged cluster to host Hyper-V virtual machines.
You need to ensure that you can store virtual machines in Storage Spaces Direct.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
You have three servers named Server1, Server2, Server3 that run Windows Server and have the Hyper-V server role installed.
You plan to create a hyper-converged cluster to host Hyper-V virtual machines.
You need to ensure that you can store virtual machines in Storage Spaces Direct.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Correct Answer:
Explanation:
https://docs.microsoft.com/en-us/system-center/vmm/s2d-hyper-converged?view=sc-vmm-2019
Drag and Drop Question
You have a server named Server1 that runs Windows Server.
For Server1, you enable the default App Control for Business policies in audit mode.
You need to ensure that specific third-party applications installed on Server1 are allowed to run by using App Control for Business.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
You have a server named Server1 that runs Windows Server.
For Server1, you enable the default App Control for Business policies in audit mode.
You need to ensure that specific third-party applications installed on Server1 are allowed to run by using App Control for Business.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Correct Answer:
Explanation:
Reference:
https://learn.microsoft.com/en-us/windows/security/application-security/application-control/app-control-for-business/design/select-types-of-rules-to-create
https://learn.microsoft.com/en-us/windows/security/application-security/application-control/app-control-for-business/design/plan-appcontrol-management
https://learn.microsoft.com/en-us/windows-server/security/osconfig/osconfig-how-to-configure-app-control-for-business
Hotspot Question
You have a failover cluster named Cluster1 that contains three nodes.
You plan to add two file server cluster roles named File1 and File2 to Cluster1. File1 will use the File Server for general use role. File2 will use the Scale-Out File Server for application data role.
What is the maximum number of nodes for File1 and File2 that can concurrently serve client connections? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
You have a failover cluster named Cluster1 that contains three nodes.
You plan to add two file server cluster roles named File1 and File2 to Cluster1. File1 will use the File Server for general use role. File2 will use the Scale-Out File Server for application data role.
What is the maximum number of nodes for File1 and File2 that can concurrently serve client connections? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
https://docs.microsoft.com/en-us/windows-server/failover-clustering/sofs-overview
You have an Azure virtual machine named VM1 that has the Web Server (IIS) server role installed.
VM1 hosts a critical line-of-business (LOB) application.
After the security team at your company deploys a new security baseline to VM1, users begin reporting that the application is unresponsive.
You suspect that the security baseline has caused networking issues.
You need to perform a network trace on VM1.
What should you do?
VM1 hosts a critical line-of-business (LOB) application.
After the security team at your company deploys a new security baseline to VM1, users begin reporting that the application is unresponsive.
You suspect that the security baseline has caused networking issues.
You need to perform a network trace on VM1.
What should you do?
Correct Answer: A
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
Hotspot Question
You have an Azure subscription.
You plan to deploy a virtual machine named VM1 to the East US Azure region and use Azure Site Recovery between availability zones.
You need to configure the disks on VM1 and the virtual network. The solution must meet the following requirements:
- Maximize the availability of VM1.
- Maintain the private IP address of VM1 during failover and failback
operations.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
You have an Azure subscription.
You plan to deploy a virtual machine named VM1 to the East US Azure region and use Azure Site Recovery between availability zones.
You need to configure the disks on VM1 and the virtual network. The solution must meet the following requirements:
- Maximize the availability of VM1.
- Maintain the private IP address of VM1 during failover and failback
operations.
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Correct Answer:
Explanation:
Box 1: Zone redundant Storage (ZRS) Premium SSD
ZRS for managed disks is only supported with Premium SSD and Standard SSD managed disks.
ZRS for managed disks isn't supported with Premium SSD v2 managed disks.
ZRS replicates your Azure managed disk synchronously across three Azure availability zones in the selected region. Each availability zone is a separate physical location with independent power, cooling, and networking.
Box 2: Two virtual networks and two subnets
Maintain the private IP address of VM1 during failover and failback operations.
During failover, you might want to keep the IP addressing in the target region identical to the source region:
Reference:
https://azure.microsoft.com/en-us/updates/asr-zrs-managed-disks/
https://learn.microsoft.com/en-us/azure/virtual-machines/disks-deploy-zrs
https://learn.microsoft.com/en-us/azure/site-recovery/site-recovery-retain-ip-azure-vm-failover
You have an Azure subscription named Sub1 that contains a resource group named RG1. RG1 contains the resources shown in the following table.
Sub1 has Microsoft Defender for Servers enabled. You are assigned the Contributor role for Sub1.
You need to implement just-in-time (JIT) VM access for VM1.
What should you do first?
Sub1 has Microsoft Defender for Servers enabled. You are assigned the Contributor role for Sub1.
You need to implement just-in-time (JIT) VM access for VM1.
What should you do first?
Correct Answer: D
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
You have a server that runs Windows Server and hosts an app named App1.
You need to prevent App1 from accessing external SMTP servers. The solution must meet the following requirements:
- Minimize the impact on App1's access to external HTTP servers.
- Minimize the impact on other apps on the server.
- Minimize administrative effort.
What should you implement in Windows Defender Firewall?
You need to prevent App1 from accessing external SMTP servers. The solution must meet the following requirements:
- Minimize the impact on App1's access to external HTTP servers.
- Minimize the impact on other apps on the server.
- Minimize administrative effort.
What should you implement in Windows Defender Firewall?
Correct Answer: C
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
You have a server named Server1 that runs the Remote Desktop Session Host role service.
Server1 has five custom applications installed.
Users who sign in to Server1 report that the server is slow. Task Manager shows that the average CPU usage on Server1 is above 90 percent. You suspect that a custom application on Server1 is consuming excessive processor capacity.
You plan to create a Data Collector Set in Performance Monitor to gather performance statistics from Server1.
You need to view the resources used by each of the five applications.
Which object should you add to the Data Collector Set?
Server1 has five custom applications installed.
Users who sign in to Server1 report that the server is slow. Task Manager shows that the average CPU usage on Server1 is above 90 percent. You suspect that a custom application on Server1 is consuming excessive processor capacity.
You plan to create a Data Collector Set in Performance Monitor to gather performance statistics from Server1.
You need to view the resources used by each of the five applications.
Which object should you add to the Data Collector Set?
Correct Answer: B
Vote an answer
Drag and Drop Question
Your network contains an Active Directory Domain Services (AD DS) domain that has the Active Directory Recycle Bin enabled. The domain contains two domain controllers named DC1 and DC2. The system state of the domain controllers is backed up daily at 23:00 by using Windows Server Backup.
You have an organizational unit (OU) named ParisUsers that contains 1,000 users.
At 08:00, DC1 shuts down for hardware maintenance. The maintenance completes, but DC1 remains shut down.
At 09:00, an administrative error causes the manager attribute of each user in ParisUsers to be deleted.
You need to recover the user account details as quickly as possible. The solution must minimize data loss.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Your network contains an Active Directory Domain Services (AD DS) domain that has the Active Directory Recycle Bin enabled. The domain contains two domain controllers named DC1 and DC2. The system state of the domain controllers is backed up daily at 23:00 by using Windows Server Backup.
You have an organizational unit (OU) named ParisUsers that contains 1,000 users.
At 08:00, DC1 shuts down for hardware maintenance. The maintenance completes, but DC1 remains shut down.
At 09:00, an administrative error causes the manager attribute of each user in ParisUsers to be deleted.
You need to recover the user account details as quickly as possible. The solution must minimize data loss.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Correct Answer:
Explanation:
https://www.itprotoday.com/active-directory/how-can-i-perform-authoritative-restoration-active-directory-ad-windows-server-2003
You have two servers named Server1 and Server2 that run Windows Server and have the Hyper- V role installed.
You plan to deploy Hyper-V Replica between Server1 and Server2. The deployment will use certificate based authentication.
You need to configure the prerequisites for the Hyper-V Replica deployment.
Which two actions should you perform on each server? Each correct answer presents part of the solution.
NOTE: Each correct answer is worth one point.
You plan to deploy Hyper-V Replica between Server1 and Server2. The deployment will use certificate based authentication.
You need to configure the prerequisites for the Hyper-V Replica deployment.
Which two actions should you perform on each server? Each correct answer presents part of the solution.
NOTE: Each correct answer is worth one point.
Correct Answer: A,D
Vote an answer
Explanation: Only visible for EduDump members. You can sign-up / login (it's free).
0
0
0
10