Latest EMC D-PE-OE-01 Actual Free Exam Questions & Community Discussion, Page 1

Question #1

A technician is setting up a previously used Dell EMC PowerEdge server. Upon power up, the PERC alerts them to the presence of a foreign configuration. In the iDRAC storage section, the technician checks Foreign View. The foreign array configuration is the same as the configuration needed for the new project.
What is a recommended way to prepare the disks for the new project?

A. Format the foreign configuration and clear the controller configuration

B. Import the foreign configuration and perform a full initialization

C. Edit the foreign configuration and set it to Ready

D. Access the Ctrl+R utility, clear the foreign configuration, and set up array as needed

Discussion 0

Correct Answer: D Vote an answer

Question #2

What is the default IP Address for the iDRAC?

A. 10.1.1.1

B. 192.168.0.120

C. 192.168.1.120

D. 10.1.2.1

Discussion 0

Correct Answer: B Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #3

You are installing an OS remotely using Virtual Media In IDRAC. When you to launch the Virtual Media client, the message: "Virtual media is currently unavailable" appears. What is the cause of this error?

A. A remote file share session is active

B. The server is powered off

C. The ISO file is corrupted

D. USB is unreachable

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #4

A technician resets the iDRAC but when they attempt to log back in to the iDRAC is offline.
Why is the iDRAC offline?

A. Technician must use iDRAC Direct to enable the iDRAC network

B. iDRAC is still in the reset process

C. DRAC has reset to the default IP address of 192.168.0.120

D. Technician must move the iDRAC network cable back to the iDRAC dedicated NIC

Discussion 0

Correct Answer: A Vote an answer

Question #5

A technician accesses the iDRAC to set up scheduled updates. This option is not available on one server, but is available on the other servers. The servers are the same model and have the same iDRAC firmware revisions.
What is required so that the technician can enable scheduled updates on the server?

A. iDRAC reset using racadm racreset command

B. iDRAC license at the Enterprise level

C. Update option enabled in Lifecycle Controller interface

D. LC Settings in Lifecycle Controller set up correctly

Discussion 0

Correct Answer: B Vote an answer

Question #6

Where is the data stored to allow Easy Restore to successfully complete a system board replacement?

A. Serial Flash storage in the server's front panel

B. NAND Flash module on the disk drive mid plane

C. IDSDM SD card

D. vFlash SD card

Discussion 0

Correct Answer: D Vote an answer

Question #7

A technician has a rack mount server with 20, 200 GB drives installed. The administrator needs three different RAID 5 virtual disks that are each 600 GB in size. All virtual disks must utilize the same set of physical disks.
How should the technician meet this requirement?

A. Create a virtual disk using 10 drives that are 600 GB in size, Split the remaining space into two virtual disks

B. Create three virtual disks that are each 600 GB in size, Assing these disks to the same disk group via Lifecycle Controller

C. Create a single disk group using 6 drives, Assign the virtual disks via the Lifecycle Controller

D. Create three disk groups using 9 drives that are each 600 GB in size, Add virtual disks to each disk group

Discussion 0

Correct Answer: A Vote an answer

Question #8

You are deploying an OS on a new Dell PowerEdge R760 at a dark-site data center. There is no management network for iDRAC, and you need to configure IDRAC using virtual media. What must you do in order to access the web interface to use the virtual media?

A. Connect using iDRAC direct

B. Update the iDRAC firmware using Lifecycle Controller

C. Enable PXE boot in BIOS

D. Connect using OpenManage Mobile

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #9

A technician is installing a new server and is not getting any link lights on the iDRAC management port. They have verified that the cable and switch port are working.
What could be causing this issue?

A. IP has not been set in the Lifecycle Controller

B. iDRAC has been disabled in the Lifecycle Controller

C. NIC selection is set for Shared LOM

D. iDRAC firmware update is currently in progress

Discussion 0

Correct Answer: D Vote an answer

Question #10

Click the Launch Simulator button.
Using the iDRAC UI, what is listed as the Cache Memory Size for the H965i storage controller?
Note: It is necessary to close (x) the simulator window before you can select a response to this question.

A. 8GB

B. 965 MB

C. 8361 MB

D. 1064 MB

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for EduDump members. You can sign-up / login (it's free).

Question #11

A technician needs to install a server with a PERC RAID controller and 24, 2.5" SAS SED drives.
The installation requires the following items to be created:
- Three equal-sized virtual disks
- Encrypted virtual disks
- A global hot spare
In addition to selecting the physical drive to be the hot spare disk, what tasks should the technician perform to set up the RAID controller?

A. Access the iDRAC GUI and create the three virtual disks, Select each virtual disk and enable encryption

B. Boot to Ctrl+R and create the three virtual disks, Select each physical drive and enable encryption

C. Boot to F12 and create the three virtual disks, Select each virtual disk and enable encryption

D. Boot to F12 and create the three virtual disks, Select each physical drive and enable encryption

Discussion 0

Correct Answer: A Vote an answer

Question #12

Into which supported hypervisor platforms can OpenManage Enterprise Systems Management Appliance be imported?

A. Windows Hyper-V, VMware ESXi, Linux KVM

B. Red Hat Linux, Windows Hyper-V, VMware ESXi

C. Proxmox VE, Linux KVM, VMware ESXi

D. Windows Hyper-V, Proxmox VE, VMware ESXi

Discussion 0

Correct Answer: A Vote an answer

Question #13

Which mobile devices are supported by Quick Sync in 13G Dell EMC PowerEdge servers?

A. iOS devices only

B. iOS, Android, and Windows Phone devices

C. iOS and Android devices only

D. Android devices only

Discussion 0

Correct Answer: D Vote an answer

Question #14

Which iDRAC feature requires the Enterprise license?

A. SSD wear monitoring

B. Customizable Security Banner

C. iDRAC Direct

D. Boot and Crash Capture

Discussion 0

Correct Answer: D Vote an answer

EMC D-PE-OE-01 Actual Free Exam Questions & Community Discussion

Download Free EMC D-PE-OE-01 Demo